Setting Up the VM and Docker Universes¶
The VM Universe¶
vm universe jobs may be executed on any execution site with VMware, Xen (via libvirt), or KVM. To do this, HTCondor must be informed of some details of the virtual machine installation, and the execution machines must be configured correctly.
What follows is not a comprehensive list of the options that help set up to use the vm universe; rather, it is intended to serve as a starting point for those users interested in getting vm universe jobs up and running quickly. Details of configuration variables are in the Configuration File Entries Relating to Virtual Machines section.
Begin by installing the virtualization package on all execute machines, according to the vendor’s instructions. We have successfully used VMware, Xen, and KVM. If considering running on a Windows system, a Perl distribution will also need to be installed; we have successfully used ActivePerl.
For VMware, VMware Server 1 must be installed and running on the execute machine. HTCondor also supports using VMware Workstation and VMware Player, version 5. Earlier versions of these products may also work. HTCondor will attempt to automatically discern which VMware product is installed. If using Player, also install the VIX API, which is freely available from VMware.
For Xen, there are three things that must exist on an execute machine to fully support vm universe jobs.
- A Xen-enabled kernel must be running. This running Xen kernel acts as Dom0, in Xen terminology, under which all VMs are started, called DomUs Xen terminology.
- The libvirtd daemon must be available, and Xend services must be running.
- The pygrub program must be available, for execution of VMs whose disks contain the kernel they will run.
For KVM, there are two things that must exist on an execute machine to fully support vm universe jobs.
- The machine must have the KVM kernel module installed and running.
- The libvirtd daemon must be installed and running.
Configuration is required to enable the execution of vm universe
jobs. The type of virtual machine that is installed on the execute
machine must be specified with the
variable. For now, only one type can be utilized per machine. For
instance, the following tells HTCondor to use VMware:
VM_TYPE = vmware
The location of the condor_vm-gahp and its log file must also be specified on the execute machine. On a Windows installation, these options would look like this:
VM_GAHP_SERVER = $(SBIN)/condor_vm-gahp.exe VM_GAHP_LOG = $(LOG)/VMGahpLog
To use VMware, identify the location of the Perl executable on the execute machine. In most cases, the default value should suffice:
VMWARE_PERL = perl
This, of course, assumes the Perl executable is in the path of the condor_master daemon. If this is not the case, then a full path to the Perl executable will be required.
If using VMware Player, which does not support snapshots, configure
START expression to reject jobs which require snapshots. These
are jobs that do not have
False. Here is an example modification to the
START = ($(START)) && (!(TARGET.VMPARAM_VMware_SnapshotDisk =?= TRUE))
The final required configuration is the location of the VMware control
script used by the condor_vm-gahp on the execute machine to talk to
the virtual machine hypervisor. It is located in HTCondor’s
VMWARE_SCRIPT = $(SBIN)/condor_vm_vmware
Note that an execute machine’s
EXECUTE variable should not contain
any symbolic links in its path, if the machine is configured to run
VMware vm universe jobs. Strange behavior has been noted when
HTCondor tries to run a vm universe VMware job using a path to a VMX
file that contains a symbolic link. An example of an error message that
may appear in such a job’s event log:
Error from starter on firstname.lastname@example.org .edu: register(/scratch/gquinn/condor/git/CONDOR_SRC/src/con dor_tests/31426/31426vmuniverse/execute/dir_31534/vmN3hylp_c ondor.vmx) = 1/Error: Command failed: A file was not found/( ERROR) Can't create snapshot for vm(/scratch/gquinn/condor/g it/CONDOR_SRC/src/condor_tests/31426/31426vmuniverse/execute /dir_31534/vmN3hylp_condor.vmx)
To work around this problem:
- If using file transfer (the submit description file contains
then modify any configuration variable
EXECUTEvalues on all execute machines, such that they do not contain symbolic link path components.
- If using a shared file system, ensure that the submit description file command vmware_dir does not use symbolic link path name components.
Xen-Specific and KVM-Specific Configuration¶
Once the configuration options have been set, restart the condor_startd daemon on that host. For example:
> condor_restart -startd leovinus
The condor_startd daemon takes a few moments to exercise the VM capabilities of the condor_vm-gahp, query its properties, and then advertise the machine to the pool as VM-capable. If the set up succeeded, then condor_status will reveal that the host is now VM-capable by printing the VM type and the version number:
> condor_status -vm leovinus
After a suitable amount of time, if this command does not give any output, then the condor_vm-gahp is having difficulty executing the VM software. The exact cause of the problem depends on the details of the VM, the local installation, and a variety of other factors. We can offer only limited advice on these matters:
For Xen and KVM, the vm universe is only available when root starts HTCondor. This is a restriction currently imposed because root privileges are required to create a virtual machine on top of a Xen-enabled kernel. Specifically, root is needed to properly use the libvirt utility that controls creation and management of Xen and KVM guest virtual machines. This restriction may be lifted in future versions, depending on features provided by the underlying tool libvirt.
When a vm Universe Job Fails to Start¶
If a vm universe job should fail to launch, HTCondor will attempt to distinguish between a problem with the user’s job description, and a problem with the virtual machine infrastructure of the matched machine. If the problem is with the job, the job will go on hold with a reason explaining the problem. If the problem is with the virtual machine infrastructure, HTCondor will reschedule the job, and it will modify the machine ClassAd to prevent any other vm universe job from matching. vm universe configuration is not slot-specific, so this change is applied to all slots.
When the problem is with the virtual machine infrastructure, these machine ClassAd attributes are changed:
HasVMwill be set to
VMOfflineReasonwill be set to a somewhat explanatory string
VMOfflineTimewill be set to the time of the failure
OfflineUniverseswill be adjusted to include
Since condor_submit adds
HasVM == True to a vm universe job’s
requirements, no further vm universe jobs will match.
Once any problems with the infrastructure are fixed, to change the machine ClassAd attributes such that the machine will once again match to vm universe jobs, an administrator has three options. All have the same effect of setting the machine ClassAd attributes to the correct values such that the machine will not reject matches for vm universe jobs.
- Restart the condor_startd daemon.
- Submit a vm universe job that explicitly matches the machine. When the job runs, the code detects the running job and causes the attributes related to the vm universe to be set indicating that vm universe jobs can match with this machine.
- Run the command line tool condor_update_machine_ad to set
machine ClassAd attribute
True, and this will cause the other attributes related to the vm universe to be set indicating that vm universe jobs can match with this machine. See the condor_update_machine_ad manual page for examples and details.
The Docker Universe¶
The execution of a docker universe job causes the instantiation of a Docker container on an execute host.
The docker universe job is mapped to a vanilla universe job, and the
submit description file must specify the submit command
identify the Docker image. The job’s
requirement ClassAd attribute
is automatically appended, such that the job will only match with an
execute machine that has Docker installed.
The Docker service must be pre-installed on each execute machine that
can execute a docker universe job. Upon start up of the condor_startd
daemon, the capability of the execute machine to run docker universe
jobs is probed, and the machine ClassAd attribute
advertised for a machine that is capable of running Docker universe
When a docker universe job is matched with a Docker-capable execute machine, HTCondor invokes the Docker CLI to instantiate the image-specific container. The job’s scratch directory tree is mounted as a Docker volume. When the job completes, is put on hold, or is evicted, the container is removed.
An administrator of a machine can optionally make additional directories on the host machine readable and writable by a running container. To do this, the admin must first give an HTCondor name to each directory with the DOCKER_VOLUMES parameter. Then, each volume must be configured with the path on the host OS with the DOCKER_VOLUME_DIR_XXX parameter. Finally, the parameter DOCKER_MOUNT_VOLUMES tells HTCondor which of these directories to always mount onto containers running on this machine.
DOCKER_VOLUMES = SOME_DIR, ANOTHER_DIR DOCKER_VOLUME_DIR_SOME_DIR = /path1 DOCKER_VOLUME_DIR_ANOTHER_DIR = /path/to/no2 DOCKER_MOUNT_VOLUMES = SOME_DIR, ANOTHER_DIR
The condor_startd will advertise which docker volumes it has available for mounting with the machine attributes HasDockerVolumeSOME_NAME = true so that jobs can match to machines with volumes they need.
Optionally, if the directory name is two directories, separated by a colon, the first directory is the name on the host machine, and the second is the value inside the container. If a “:ro” is specified after the second directory name, the volume will be mounted read-only inside the container.
These directories will be bind-mounted unconditionally inside the
container. If an administrator wants to bind mount a directory only for
some jobs, perhaps only those submitted by some trusted user, the
may be used. This is a
class ad expression, evaluated in the context of the job ad and the
machine ad. Only when it evaluted to TRUE, is the volume mounted.
Extending the above example,
DOCKER_VOLUMES = SOME_DIR, ANOTHER_DIR DOCKER_VOLUME_DIR_SOME_DIR = /path1 DOCKER_VOLUME_DIR_SOME_DIR_MOUNT_IF = WantSomeDirMounted && Owner == "smith" DOCKER_VOLUME_DIR_ANOTHER_DIR = /path/to/no2 DOCKER_MOUNT_VOLUMES = SOME_DIR, ANOTHER_DIR
In this case, the directory /path1 will get mounted inside the container only for jobs owned by user “smith”, and who set +WantSomeDirMounted = true in their submit file.
In addition to installing the Docker service, the single configuration
DOCKER must be set. It defines the
location of the Docker CLI and can also specify that the
condor_starter daemon has been given a password-less sudo permission
to start the container as root. Details of the
variable are in the condor_startd Configuration File Macros section.
Docker must be installed as root by following these steps on an Enterprise Linux machine.
Acquire and install the docker-engine community edition by following the installations instructions from docker.com
Set up the groups:
usermod -aG docker condor
Invoke the docker software:
systemctl start docker systemctl enable docker
Reconfigure the execute machine, such that it can set the machine ClassAd attribute
Check that the execute machine properly advertises that it is docker-capable with:
condor_status -l | grep -i docker
The output of this command line for a correctly-installed and docker-capable execute host will be similar to
HasDocker = true DockerVersion = "Docker Version 1.6.0, build xxxxx/1.6.0"
By default, HTCondor will keep the 20 most recently used Docker images
on the local machine. This number may be controlled with the
, to increase or decrease the
number of images, and the corresponding disk space, used by Docker.
By default, Docker containers will be run with all rootly capabilties
dropped, and with setuid and setgid binaries disabled, for security
reasons. If you need to run containers with root privilige, you may set
the configuration parameter
to an expression that
evalutes to false. This expression is evaluted in the context of the
machine ad (my) and the job ad (target).
Docker support an enormous number of command line options when creating
containers. While HTCondor tries to map as many useful options from
submit files and machine descriptions to command line options, an
administrator may want additional options passed to the docker container
create command. To do so, the parameter
can be set, and condor will append
these to the docker container create command.
Docker universe jobs may fail to start on certain Linux machines when SELinux is enabled. The symptom is a permission denied error when reading or executing from the condor scratch directory. To fix this problem, an administrator will need to run the following command as root on the execute directories for all the startd machines:
# chcon -Rt svirt_sandbox_file_t /var/lib/condor/execute