# DAGMan Workflows¶

DAGMan is a HTCondor tool that allows multiple jobs to be organized in workflows, represented as a directed acyclic graph (DAG). A DAGMan workflow automatically submits jobs in a particular order, such that certain jobs need to complete before others start running. This allows the outputs of some jobs to be used as inputs for others, and makes it easy to replicate a workflow multiple times in the future.

## Describing Workflows with DAGMan¶

A DAGMan workflow is described in a DAG input file. The input file specifies the nodes of the DAG as well as the dependencies that order the DAG.

A node within a DAG represents a unit of work. It contains the following:

• Job: An HTCondor job, defined in a submit file.

• PRE script (optional): A script that runs before the job starts. Typically used to verify that all inputs are valid.

• POST script (optional): A script that runs after the job finishes. Typically used to verify outputs and clean up temporary files.

The following diagram illustrates the elements of a node:

One Node within a DAG

An edge in DAGMan describes a dependency between two nodes. DAG edges are directional; each has a parent and a child, where the parent node must finish running before the child starts. Any node can have an unlimited number of parents and children.

### Example: Diamond DAG¶

A simple diamond-shaped DAG, as shown in the following image is presented as a starting point for examples. This DAG contains 4 nodes.

Diamond DAG

A very simple DAG input file for this diamond-shaped DAG is:

# File name: diamond.dag

JOB  A  A.condor
JOB  B  B.condor
JOB  C  C.condor
JOB  D  D.condor
PARENT A CHILD B C
PARENT B C CHILD D


A set of basic commands appearing in a DAG input file is described below.

### JOB¶

The JOB command specifies an HTCondor job. The syntax used for each JOB command is:

JOB JobName SubmitDescriptionFileName [DIR directory] [NOOP] [DONE]


A JOB entry maps a JobName to an HTCondor submit description file. The JobName uniquely identifies nodes within the DAG input file and in output messages. Each node name, given by JobName, within the DAG must be unique.

The values defined for JobName and SubmitDescriptionFileName are case sensitive, as file names in a file system are case sensitive. The JobName can be any string that contains no white space, except for the strings PARENT and CHILD (in upper, lower, or mixed case). JobName also cannot contain special characters (‘.’, ‘+’) which are reserved for system use.

The optional DIR keyword specifies a working directory for this node, from which the HTCondor job will be submitted, and from which a PRE and/or POST script will be run. If a relative directory is specified, it is relative to the current working directory as the DAG is submitted. Note that a DAG containing DIR specifications cannot be run in conjunction with the -usedagdir command-line argument to condor_submit_dag.

The optional NOOP keyword identifies that the HTCondor job within the node is not to be submitted to HTCondor. This is useful for debugging a complex DAG structure, by marking jobs as NOOP s to verify that the control flow through the DAG is correct. The NOOP keywords are then removed before submitting the DAG. Any PRE and POST scripts for jobs specified with NOOP are executed; to avoid running the PRE and POST scripts, comment them out. Even though the job specified with NOOP is not submitted, its submit description file must still exist.

The optional DONE keyword identifies a node as being already completed. This is mainly used by Rescue DAGs generated by DAGMan itself, in the event of a failure to complete the workflow. Users should generally not use the DONE keyword. The NOOP keyword is more flexible in avoiding the execution of a job within a node.

### DATA¶

As of version 8.3.5, condor_dagman no longer supports DATA nodes.

### PARENT … CHILD …¶

The PARENT … CHILD … command specifies the dependencies within the DAG. Nodes are parents and/or children within the DAG. A parent node must be completed successfully before any of its children may be started. A child node may only be started once all its parents have successfully completed.

The syntax used for each dependency (PARENT/CHILD) command is

PARENT ParentJobName [ParentJobName2 ... ] CHILD  ChildJobName [ChildJobName2 ... ]


The PARENT keyword is followed by one or more ParentJobName*s. The *CHILD keyword is followed by one or more ChildJobName s. Each child job depends on every parent job within the line. A single line in the input file can specify the dependencies from one or more parents to one or more children. The diamond-shaped DAG example may specify the dependencies with

PARENT A CHILD B C
PARENT B C CHILD D


An alternative specification for the diamond-shaped DAG may specify some or all of the dependencies on separate lines:

PARENT A CHILD B C
PARENT B CHILD D
PARENT C CHILD D


As a further example, the line

PARENT p1 p2 CHILD c1 c2


produces four dependencies:

1. p1 to c1

2. p1 to c2

3. p2 to c1

4. p2 to c2

### SCRIPT¶

The optional SCRIPT command specifies processing that is done either before a job within a node is submitted or after a job within a node completes its execution. Processing done before a job is submitted is called a PRE script. Processing done after a job completes its execution is called a POST script. Note that the executable specified does not necessarily have to be a shell script (Unix) or batch file (Windows); but it should be relatively light weight because it will be run directly on the submit machine, not submitted as an HTCondor job.

The syntax used for each PRE or POST command is

SCRIPT [DEFER status time] PRE [JobName | ALL_NODES] ExecutableName [arguments]

SCRIPT [DEFER status time] POST [JobName | ALL_NODES] ExecutableName [arguments]


The SCRIPT command uses the PRE or POST keyword, which specifies the relative timing of when the script is to be run. The JobName identifies the node to which the script is attached. The ExecutableName specifies the executable (e.g., shell script or batch file) to be executed, and may not contain spaces. The optional arguments are command line arguments to the script, and spaces delimit the arguments. Both ExecutableName and optional arguments are case sensitive.

Scripts are executed on the submit machine; the submit machine is not necessarily the same machine upon which the node’s job is run. Further, a single cluster of HTCondor jobs may be spread across several machines.

The optional DEFER feature causes a retry of only the script, if the execution of the script exits with the exit code given by status. The retry occurs after at least time seconds, rather than being considered failed. While waiting for the retry, the script does not count against a maxpre or maxpost limit. The ordering of the DEFER feature within the SCRIPT specification is fixed. It must come directly after the SCRIPT keyword; this is done to avoid backward compatibility issues for any DAG with a JobName of DEFER.

A PRE script is commonly used to place files in a staging area for the jobs to use. A POST script is commonly used to clean up or remove files once jobs are finished running. An example uses PRE and POST scripts to stage files that are stored on tape. The PRE script reads compressed input files from the tape drive, uncompresses them, and places the resulting files in the current directory. The HTCondor jobs can then use these files, producing output files. The POST script compresses the output files, writes them out to the tape, and then removes both the staged files and the output files.

If the PRE script fails, then the HTCondor job associated with the node is not submitted, and (as of version 8.5.4) the POST script is not run either (by default). However, if the job is submitted, and there is a POST script, the POST script is always run once the job finishes. (The behavior when the PRE script fails may may be changed to run the POST script by setting configuration variable DAGMAN_ALWAYS_RUN_POST to True or by passing the -AlwaysRunPost argument to condor_submit_dag.)

Progress towards completion of the DAG is based upon the success of the nodes within the DAG. The success of a node is based upon the success of the job(s), PRE script, and POST script. A job, PRE script, or POST script with an exit value not equal to 0 is considered failed. The exit value of whatever component of the node was run last determines the success or failure of the node. Table 2.1 lists the definition of node success and failure for all variations of script and job success and failure, when DAGMAN_ALWAYS_RUN_POST is set to False. In this table, a dash (-) represents the case where a script does not exist for the DAG, S represents success, and F represents failure.

Table 2.2 lists the definition of node success and failure only for the cases where the PRE script fails, when DAGMAN_ALWAYS_RUN_POST is set to True.

PRE

JOB

POST

Node

-

S

-

S

-

F

-

F

-

S

S

S

-

S

F

F

-

F

S

S

-

F

F

F

S

S

-

S

S

F

-

F

S

S

S

S

S

S

F

F

S

F

S

S

S

F

F

F

S

not run

-

F

S

not run

not run

F

Table 2.1: Node Success or Failure definition with DAGMAN_ALWAYS_RUN_POST = False (the default).

PRE

JOB

POST

Node

F

not run

-

F

F

not run

S

S

F

not run

F

F

Table 2.2: Node Success or Failure definition with DAGMAN_ALWAYS_RUN_POST = True.

Special script argument macros

The five macros $JOB, $RETRY, $MAX_RETRIES, $DAG_STATUS and $FAILED_COUNT can be used within the DAG input file as arguments passed to a PRE or POST script. The three macros $JOBID, $RETURN, and $PRE_SCRIPT_RETURN can be used as arguments to POST scripts. The use of these variables is limited to being used as an individual command line argument to the script, surrounded by spaces, in order to cause the substitution of the variable’s value.

The special macros are as follows:

• $JOB evaluates to the (case sensitive) string defined for JobName. • $RETRY evaluates to an integer value set to 0 the first time a node is run, and is incremented each time the node is retried. See Advanced Features of DAGMan for the description of how to cause nodes to be retried.

• $MAX_RETRIES evaluates to an integer value set to the maximum number of retries for the node. See Advanced Features of DAGMan for the description of how to cause nodes to be retried. If no retries are set for the node, $MAX_RETRIES will be set to 0.

• $JOBID (for POST scripts only) evaluates to a representation of the HTCondor job ID of the node job. It is the value of the job ClassAd attribute ClusterId, followed by a period, and then followed by the value of the job ClassAd attribute ProcId. An example of a job ID might be 1234.0. For nodes with multiple jobs in the same cluster, the ProcId value is the one of the last job within the cluster. • $RETURN (for POST scripts only) variable evaluates to the return value of the HTCondor job, if there is a single job within a cluster. With multiple jobs within the same cluster, there are two cases to consider. In the first case, all jobs within the cluster are successful; the value of $RETURN will be 0, indicating success. In the second case, one or more jobs from the cluster fail. When condor_dagman sees the first terminated event for a job that failed, it assigns that job’s return value as the value of $RETURN, and it attempts to remove all remaining jobs within the cluster. Therefore, if multiple jobs in the cluster fail with different exit codes, a race condition determines which exit code gets assigned to $RETURN. A job that dies due to a signal is reported with a $RETURN value representing the additive inverse of the signal number. For example, SIGKILL (signal 9) is reported as -9. A job whose batch system submission fails is reported as -1001. A job that is externally removed from the batch system queue (by something other than condor_dagman) is reported as -1002.

• $PRE_SCRIPT_RETURN (for POST scripts only) variable evaluates to the return value of the PRE script of a node, if there is one. If there is no PRE script, this value will be -1. If the node job was skipped because of failure of the PRE script, the value of $RETURN will be -1004 and the value of $PRE_SCRIPT_RETURN will be the exit value of the PRE script; the POST script can use this to see if the PRE script exited with an error condition, and assign success or failure to the node, as appropriate. • $DAG_STATUS is the status of the DAG. Note that this macro’s value and definition is unrelated to the attribute named DagStatus as defined for use in a node status file. This macro’s value is the same as the job ClassAd attribute DAG_Status that is defined within the condor_dagman job’s ClassAd. This macro may have the following values:

• 0: OK

• 1: error; an error condition different than those listed here

• 2: one or more nodes in the DAG have failed

• 3: the DAG has been aborted by an ABORT-DAG-ON specification

• 4: removed; the DAG has been removed by condor_rm

• 5: cycle; a cycle was found in the DAG

• 6: halted; the DAG has been halted (see Suspending a Running DAG)

• $FAILED_COUNT is defined by the number of nodes that have failed in the DAG. Examples that use PRE or POST scripts Examples use the diamond-shaped DAG. A first example uses a PRE script to expand a compressed file needed as input to each of the HTCondor jobs of nodes B and C. The DAG input file: # File name: diamond.dag JOB A A.condor JOB B B.condor JOB C C.condor JOB D D.condor SCRIPT PRE B pre.sh$JOB .gz
SCRIPT PRE  C  pre.sh $JOB .gz PARENT A CHILD B C PARENT B C CHILD D  The script pre.sh uses its command line arguments to form the file name of the compressed file. The script contains #!/bin/sh gunzip${1}${2}  Therefore, the PRE script invokes gunzip B.gz  for node B, which uncompresses file B.gz, placing the result in file B. A second example uses the $RETURN macro. The DAG input file contains the POST script specification:

SCRIPT POST A stage-out job_status $RETURN  If the HTCondor job of node A exits with the value -1, the POST script is invoked as stage-out job_status -1  The slightly different example POST script specification in the DAG input file SCRIPT POST A stage-out job_status=$RETURN


invokes the POST script with

stage-out job_status=$RETURN  This example shows that when there is no space between the = sign and the variable $RETURN, there is no substitution of the macro’s value.

### PRE_SKIP¶

The behavior of DAGMan with respect to node success or failure can be changed with the addition of a PRE_SKIP command. A PRE_SKIP line within the DAG input file uses the syntax:

PRE_SKIP [JobName | ALL_NODES] non-zero-exit-code


The PRE script of a node identified by JobName that exits with the value given by non-zero-exit-code skips the remainder of the node entirely. Neither the job associated with the node nor the POST script will be executed, and the node will be marked as successful.

## Node Job Submit File Contents¶

Each node in a DAG may use a unique submit description file. A key limitation is that each HTCondor submit description file must submit jobs described by a single cluster number; DAGMan cannot deal with a submit description file producing multiple job clusters.

Consider again the diamond-shaped DAG example, where each node job uses the same submit description file.

# File name: diamond.dag

JOB  A  diamond_job.condor
JOB  B  diamond_job.condor
JOB  C  diamond_job.condor
JOB  D  diamond_job.condor
PARENT A CHILD B C
PARENT B C CHILD D


Here is a sample HTCondor submit description file for this DAG:

# File name: diamond_job.condor

executable   = /path/diamond.exe
output       = diamond.out.$(cluster) error = diamond.err.$(cluster)
log          = diamond_condor.log
universe     = vanilla
queue


Since each node uses the same HTCondor submit description file, this implies that each node within the DAG runs the same job. The $(Cluster) macro produces unique file names for each job’s output. The job ClassAd attribute DAGParentNodeNames is also available for use within the submit description file. It defines a comma separated list of each JobName which is a parent node of this job’s node. This attribute may be used in the arguments command for all but scheduler universe jobs. For example, if the job has two parents, with JobName s B and C, the submit description file command arguments = $$([DAGParentNodeNames])  will pass the string "B,C" as the command line argument when invoking the job. DAGMan supports jobs with queues of multiple procs, so for example: queue 500  will queue 500 procs as expected. ### Inline Submit Descriptions¶ Instead of using a submit description file, you can alternatively include an inline submit description directly inside the .dag file. An inline submit description should be wrapped in { and } braces, with each argument appearing on a separate line, just like the contents of a regular submit file. Using the previous diamond-shaped DAG example, the diamond.dag file would look like this: # File name: diamond.dag JOB A { executable = /path/diamond.exe output = diamond.out.(cluster) error = diamond.err.(cluster) log = diamond_condor.log universe = vanilla } JOB B { executable = /path/diamond.exe output = diamond.out.(cluster) error = diamond.err.(cluster) log = diamond_condor.log universe = vanilla } JOB C { executable = /path/diamond.exe output = diamond.out.(cluster) error = diamond.err.(cluster) log = diamond_condor.log universe = vanilla } JOB D { executable = /path/diamond.exe output = diamond.out.(cluster) error = diamond.err.(cluster) log = diamond_condor.log universe = vanilla } PARENT A CHILD B C PARENT B C CHILD D  This can be helpful when trying to manage lots of submit descriptions, so they can all be described in the same file instead of needed to regularly shift between many files. The main drawback of using inline submit descriptions is that they do not support the queue statement or any variations thereof. Any job described inline in the .dag file will only have a single instance submitted. ## DAG Submission¶ A DAG is submitted using the tool condor_submit_dag. The manual page for condor_submit_dag details the command. The simplest of DAG submissions has the syntax  condor_submit_dag DAGInputFileName  and the current working directory contains the DAG input file. The diamond-shaped DAG example may be submitted with  condor_submit_dag diamond.dag  Do not submit the same DAG, with same DAG input file, from within the same directory, such that more than one of this same DAG is running at the same time. It will fail in an unpredictable manner, as each instance of this same DAG will attempt to use the same file to enforce dependencies. To increase robustness and guarantee recoverability, the condor_dagman process is run as an HTCondor job. As such, it needs a submit description file. condor_submit_dag generates this needed submit description file, naming it by appending .condor.sub to the name of the DAG input file. This submit description file may be edited if the DAG is submitted with  condor_submit_dag -no_submit diamond.dag  causing condor_submit_dag to create the submit description file, but not submit condor_dagman to HTCondor. To submit the DAG, once the submit description file is edited, use  condor_submit diamond.dag.condor.sub  Submit machines with limited resources are supported by command line options that place limits on the submission and handling of HTCondor jobs and PRE and POST scripts. Presented here are descriptions of the command line options to condor_submit_dag. These same limits can be set in configuration. Each limit is applied within a single DAG. ### DAG Throttling¶ • Total nodes/clusters: The -maxjobs option specifies the maximum number of clusters that condor_dagman can submit at one time. Since each node corresponds to a single cluster, this limit restricts the number of nodes that can be submitted (in the HTCondor queue) at a time. It is commonly used when there is a limited amount of input file staging capacity. As a specific example, consider a case where each node represents a single HTCondor proc that requires 4 MB of input files, and the proc will run in a directory with a volume of 100 MB of free space. Using the argument -maxjobs 25 guarantees that a maximum of 25 clusters, using a maximum of 100 MB of space, will be submitted to HTCondor at one time. (See the condor_submit_dag manual page) for more information. Also see the equivalent DAGMAN_MAX_JOBS_SUBMITTED configuration option (ref:admin-manual/configuration-macros:configuration file entries for dagman). • Idle procs: The number of idle procs within a given DAG can be limited with the optional command line argument -maxidle. condor_dagman will not submit any more node jobs until the number of idle procs in the DAG goes below this specified value, even if there are ready nodes in the DAG. This allows condor_dagman to submit jobs in a way that adapts to the load on the HTCondor pool at any given time. If the pool is lightly loaded, condor_dagman will end up submitting more jobs; if the pool is heavily loaded, condor_dagman will submit fewer jobs. (See the condor_submit_dag manual page for more information.) Also see the equivalent DAGMAN_MAX_JOBS_IDLE configuration option (ref:admin-manual/configuration-macros:configuration file entries for dagman). • Subsets of nodes: Node submission can also be throttled in a finer-grained manner by grouping nodes into categories. See section Advanced Features of DAGMan for more details. • PRE/POST scripts: Since PRE and POST scripts run on the submit machine, it may be desirable to limit the number of PRE or POST scripts running at one time. The optional -maxpre command line argument limits the number of PRE scripts that may be running at one time, and the optional -maxpost command line argument limits the number of POST scripts that may be running at one time. (See the condor_submit_dag manual page for more information.) Also see the equivalent DAGMAN_MAX_PRE_SCRIPTS and DAGMAN_MAX_POST_SCRIPTS (ref:admin-manual/configuration-macros:configuration file entries for dagman) configuration options. ## File Paths in DAGs¶ condor_dagman assumes that all relative paths in a DAG input file and the associated HTCondor submit description files are relative to the current working directory when condor_submit_dag is run. This works well for submitting a single DAG. It presents problems when multiple independent DAGs are submitted with a single invocation of condor_submit_dag. Each of these independent DAGs would logically be in its own directory, such that it could be run or tested independent of other DAGs. Thus, all references to files will be designed to be relative to the DAG’s own directory. Consider an example DAG within a directory named dag1. There would be a DAG input file, named one.dag for this example. Assume the contents of this DAG input file specify a node job with JOB A A.submit  Further assume that partial contents of submit description file A.submit specify executable = programA input = A.input  Directory contents are dag1/ ├── A.input ├── A.submit ├── one.dag └── programA  All file paths are correct relative to the dag1 directory. Submission of this example DAG sets the current working directory to dag1 and invokes condor_submit_dag:  cd dag1 condor_submit_dag one.dag  Expand this example such that there are now two independent DAGs, and each is contained within its own directory. For simplicity, assume that the DAG in dag2 has remarkably similar files and file naming as the DAG in dag1. Assume that the directory contents are parent/ ├── dag1 │ ├── A.input │ ├── A.submit │ ├── one.dag │ └── programA └── dag2 ├── B.input ├── B.submit ├── programB └── two.dag  The goal is to use a single invocation of condor_submit_dag to run both dag1 and dag2. The invocation  cd parent condor_submit_dag dag1/one.dag dag2/two.dag  does not work. Path names are now relative to parent, which is not the desired behavior. The solution is the -usedagdir command line argument to condor_submit_dag. This feature runs each DAG as if condor_submit_dag had been run in the directory in which the relevant DAG file exists. A working invocation is  cd parent condor_submit_dag -usedagdir dag1/one.dag dag2/two.dag  Output files will be placed in the correct directory, and the .dagman.out file will also be in the correct directory. A Rescue DAG file will be written to the current working directory, which is the directory when condor_submit_dag is invoked. The Rescue DAG should be run from that same current working directory. The Rescue DAG includes all the path information necessary to run each node job in the proper directory. Use of -usedagdir does not work in conjunction with a JOB node specification within the DAG input file using the DIR keyword. Using both will be detected and generate an error. ## DAG Monitoring¶ After submission, the progress of the DAG can be monitored by looking at the job event log file(s) or observing the e-mail that job submission to HTCondor causes, or by using condor_q -dag. Detailed information about a DAG’s job progress can be obtained using  condor_q -l <dagman-job-id>  There is also a large amount of information logged in an extra file. The name of this extra file is produced by appending .dagman.out to the name of the DAG input file; for example, if the DAG input file is diamond.dag, this extra file is named diamond.dag.dagman.out. The .dagman.out file is an important resource for debugging; save this file if a problem occurs. The dagman.out is appended to, rather than overwritten, with each new DAGMan run. ## Editing a Running DAG¶ Certain properties of a running DAG can be changed after the workflow has been started. The values of these properties are published in the condor_dagman job ad; changing any of these properties using condor_qedit will also update the internal DAGMan value. Currently, you can change the following attributes:  Attribute Name Attribute Description DAGMan_MaxJobs Maximum number of running jobs DAGMan_MaxIdle Maximum number of idle jobs DAGMan_MaxPreScripts Maximum number of running PRE scripts DAGMan_MaxPostScripts Maximum number of running POST scripts To edit one of these properties, use the condor_qedit tool with the job ID of the condor_dagman job, for example:  condor_qedit <dagman-job-id> DAGMan_MaxJobs 1000  To view all the properties of a condor_dagman job:  condor_q -l <dagman-job-id> | grep DAGMan  ## Removing a DAG¶ To remove an entire DAG, consisting of the condor_dagman job, plus any jobs submitted to HTCondor, remove the condor_dagman job by running condor_rm. For example,  condor_q -- Submitter: turunmaa.cs.wisc.edu : <128.105.175.125:36165> : turunmaa.cs.wisc.edu ID OWNER SUBMITTED RUN_TIME ST PRI SIZE CMD 9.0 taylor 10/12 11:47 0+00:01:32 R 0 8.7 condor_dagman -f - 11.0 taylor 10/12 11:48 0+00:00:00 I 0 3.6 B.out 12.0 taylor 10/12 11:48 0+00:00:00 I 0 3.6 C.out 3 jobs; 2 idle, 1 running, 0 held condor_rm 9.0  When a condor_dagman job is removed, all node jobs (including sub-DAGs) of that condor_dagman will be removed by the condor_schedd. As of version 8.5.8, the default is that condor_dagman itself also removes the node jobs (to fix a race condition that could result in “orphaned” node jobs). (The condor_schedd has to remove the node jobs to deal with the case of removing a condor_dagman job that has been held.) The previous behavior of condor_dagman itself not removing the node jobs can be restored by setting the DAGMAN_REMOVE_NODE_JOBS configuration macro (see ref:admin-manual/configuration-macros:configuration file entries for dagman) to False. This will decrease the load on the condor_schedd, at the cost of allowing the possibility of “orphaned” node jobs. A removed DAG will be considered failed unless the DAG has a FINAL node that succeeds. In the case where a machine is scheduled to go down, DAGMan will clean up memory and exit. However, it will leave any submitted jobs in the HTCondor queue. ## Suspending a Running DAG¶ It may be desired to temporarily suspend a running DAG. For example, the load may be high on the submit machine, and therefore it is desired to prevent DAGMan from submitting any more jobs until the load goes down. There are two ways to suspend (and resume) a running DAG. • Use condor_hold/condor_release on the condor_dagman job. After placing the condor_dagman job on hold, no new node jobs will be submitted, and no PRE or POST scripts will be run. Any node jobs already in the HTCondor queue will continue undisturbed. Any running PRE or POST scripts will be killed. If the condor_dagman job is left on hold, it will remain in the HTCondor queue after all of the currently running node jobs are finished. To resume the DAG, use condor_release on the condor_dagman job. Note that while the condor_dagman job is on hold, no updates will be made to the dagman.out file. • Use a DAG halt file. The second way of suspending a DAG uses the existence of a specially-named file to change the state of the DAG. When in this halted state, no PRE scripts will be run, and no node jobs will be submitted. Running node jobs will continue undisturbed. A halted DAG will still run POST scripts, and it will still update the dagman.out file. This differs from behavior of a DAG that is held. Furthermore, a halted DAG will not remain in the queue indefinitely; when all of the running node jobs have finished, DAGMan will create a Rescue DAG and exit. To resume a halted DAG, remove the halt file. The specially-named file must be placed in the same directory as the DAG input file. The naming is the same as the DAG input file concatenated with the string .halt. For example, if the DAG input file is test1.dag, then test1.dag.halt will be the required name of the halt file. As any DAG is first submitted with condor_submit_dag, a check is made for a halt file. If one exists, it is removed. Note that neither condor_hold nor a DAG halt is propagated to sub-DAGs. In other words, if you condor_hold or create a halt file for a DAG that has sub-DAGs, any sub-DAGs that are already in the queue will continue to submit node jobs. A condor_hold or DAG halt does, however, apply to splices, because they are merged into the parent DAG and controlled by a single condor_dagman instance. ## Advanced Features of DAGMan¶ ### Retrying Failed Nodes¶ DAGMan can retry any failed node in a DAG by specifying the node in the DAG input file with the RETRY command. The use of retry is optional. The syntax for retry is RETRY [JobName | ALL_NODES] NumberOfRetries [UNLESS-EXIT value]  where JobName identifies the node. NumberOfRetries is an integer number of times to retry the node after failure. The implied number of retries for any node is 0, the same as not having a retry line in the file. Retry is implemented on nodes, not parts of a node. The diamond-shaped DAG example may be modified to retry node C: # File name: diamond.dag JOB A A.condor JOB B B.condor JOB C C.condor JOB D D.condor PARENT A CHILD B C PARENT B C CHILD D RETRY C 3  If node C is marked as failed for any reason, then it is started over as a first retry. The node will be tried a second and third time, if it continues to fail. If the node is marked as successful, then further retries do not occur. Retry of a node may be short circuited using the optional keyword UNLESS-EXIT, followed by an integer exit value. If the node exits with the specified integer exit value, then no further processing will be done on the node. The macro RETRY evaluates to an integer value, set to 0 first time a node is run, and is incremented each time for each time the node is retried. The macro MAX_RETRIES is the value set for NumberOfRetries. These macros may be used as arguments passed to a PRE or POST script. ### Stopping the Entire DAG¶ The ABORT-DAG-ON command provides a way to abort the entire DAG if a given node returns a specific exit code. The syntax for ABORT-DAG-ON is ABORT-DAG-ON [JobName | ALL_NODES] AbortExitValue [RETURN DAGReturnValue]  If the return value of the node specified by JobName matches AbortExitValue, the DAG is immediately aborted. A DAG abort differs from a node failure, in that a DAG abort causes all nodes within the DAG to be stopped immediately. This includes removing the jobs in nodes that are currently running. A node failure differs, as it would allow the DAG to continue running, until no more progress can be made due to dependencies. The behavior differs based on the existence of PRE and/or POST scripts. If a PRE script returns the AbortExitValue value, the DAG is immediately aborted. If the HTCondor job within a node returns the AbortExitValue value, the DAG is aborted if the node has no POST script. If the POST script returns the AbortExitValue value, the DAG is aborted. An abort overrides node retries. If a node returns the abort exit value, the DAG is aborted, even if the node has retry specified. When a DAG aborts, by default it exits with the node return value that caused the abort. This can be changed by using the optional RETURN keyword along with specifying the desired DAGReturnValue. The DAG abort return value can be used for DAGs within DAGs, allowing an inner DAG to cause an abort of an outer DAG. A DAG return value other than 0, 1, or 2 will cause the condor_dagman job to stay in the queue after it exits and get retried, unless the on_exit_remove expression in the .condor.sub file is manually modified. Adding ABORT-DAG-ON for node C in the diamond-shaped DAG # File name: diamond.dag JOB A A.condor JOB B B.condor JOB C C.condor JOB D D.condor PARENT A CHILD B C PARENT B C CHILD D RETRY C 3 ABORT-DAG-ON C 10 RETURN 1  causes the DAG to be aborted, if node C exits with a return value of 10. Any other currently running nodes, of which only node B is a possibility for this particular example, are stopped and removed. If this abort occurs, the return value for the DAG is 1. ### Variable Values Associated with Nodes¶ Macros defined for DAG nodes can be used within the submit description file of the node job. The VARS command provides a method for defining a macro. Macros are defined on a per-node basis, using the syntax VARS [JobName | ALL_NODES] macroname="string" [macroname2="string2" ... ]  The macro may be used within the submit description file of the relevant node. A macroname may contain alphanumeric characters (a-z, A-Z, and 0-9) and the underscore character. The space character delimits macros, such that there may be more than one macro defined on a single line. Multiple lines defining macros for the same node are permitted. Correct syntax requires that the string must be enclosed in double quotes. To use a double quote mark within a string, escape the double quote mark with the backslash character (\). To add the backslash character itself, use two backslashes (\). A restriction is that the macroname itself cannot begin with the string queue, in any combination of upper or lower case letters. Examples If the DAG input file contains # File name: diamond.dag JOB A A.submit JOB B B.submit JOB C C.submit JOB D D.submit VARS A state="Wisconsin" PARENT A CHILD B C PARENT B C CHILD D  then the submit description file A.submit may use the macro state. Consider this submit description file A.submit: # file name: A.submit executable = A.exe log = A.log arguments = "(state)" queue  The macro value expands to become a command-line argument in the invocation of the job. The job is invoked with A.exe Wisconsin  The use of macros may allow a reduction in the number of distinct submit description files. A separate example shows this intended use of VARS. In the case where the submit description file for each node varies only in file naming, macros reduce the number of submit description files to one. This example references a single submit description file for each of the nodes in the DAG input file, and it uses the VARS entry to name files used by each job. The relevant portion of the DAG input file appears as JOB A theonefile.sub JOB B theonefile.sub JOB C theonefile.sub VARS A filename="A" VARS B filename="B" VARS C filename="C"  The submit description file appears as # submit description file called: theonefile.sub executable = progX output = (filename) error = error.(filename) log = (filename).log queue  For a DAG such as this one, but with thousands of nodes, the ability to write and maintain a single submit description file together with a single, yet more complex, DAG input file is worthwhile. ### Multiple macroname definitions¶ If a macro name for a specific node in a DAG is defined more than once, as it would be with the partial file contents JOB job1 job1.submit VARS job1 a="foo" VARS job1 a="bar"  a warning is written to the log, of the format Warning: VAR <macroname> is already defined in job <JobName> Discovered at file "<DAG input file name>", line <line number>  The behavior of DAGMan is such that all definitions for the macro exist, but only the last one defined is used as the variable’s value. Using this example, if the job1.submit submit description file contains arguments = "(a)"  then the argument will be bar. ### Special characters within VARS string definitions¶ The value defined for a macro may contain spaces and tabs. It is also possible to have double quote marks and backslashes within a value. In order to have spaces or tabs within a value specified for a command line argument, use the New Syntax format for the arguments submit command, as described in condor_submit. Escapes for double quote marks depend on whether the New Syntax or Old Syntax format is used for the arguments submit command. Note that in both syntaxes, double quote marks require two levels of escaping: one level is for the parsing of the DAG input file, and the other level is for passing the resulting value through condor_submit. As of HTCondor version 8.3.7, single quotes are permitted within the value specification. For the specification of command line arguments, single quotes can be used in three ways: • in Old Syntax, within a macro’s value specification • in New Syntax, within a macro’s value specification • in New Syntax only, to delimit an argument containing white space There are examples of all three cases below. In New Syntax, to pass a single quote as part of an argument, escape it with another single quote for condor_submit parsing as in the example’s NodeA fourth macro. As an example that shows uses of all special characters, here are only the relevant parts of a DAG input file. Note that the NodeA value for the macro second contains a tab. VARS NodeA first="Alberto Contador" VARS NodeA second="\"\"Andy Schleck\"\"" VARS NodeA third="Lance\\ Armstrong" VARS NodeA fourth="Vincenzo ''The Shark'' Nibali" VARS NodeA misc="!@#%^&*()_-=+=[]{}?/" VARS NodeB first="Lance_Armstrong" VARS NodeB second="\\\"Andreas_Kloden\\\"" VARS NodeB third="Ivan_Basso" VARS NodeB fourth="Bernard_'The_Badger'_Hinault" VARS NodeB misc="!@#%^&*()_-=+=[]{}?/" VARS NodeC args="'Nairo Quintana' 'Chris Froome'"  Consider an example in which the submit description file for NodeA uses the New Syntax for the arguments command: arguments = "'(first)' '(second)' '(third)' '(fourth)' '(misc)'"  The single quotes around each variable reference are only necessary if the variable value may contain spaces or tabs. The resulting values passed to the NodeA executable are: Alberto Contador "Andy Schleck" Lance\ Armstrong Vincenzo 'The Shark' Nibali !@#%^&*()_-=+=[]{}?/  Consider an example in which the submit description file for NodeB uses the Old Syntax for the arguments command: arguments = (first) (second) (third) (fourth) (misc)  The resulting values passed to the NodeB executable are: Lance_Armstrong "Andreas_Kloden" Ivan_Basso Bernard_'The_Badger'_Hinault !@#%^&*()_-=+=[]{}?/  Consider an example in which the submit description file for NodeC uses the New Syntax for the arguments command: arguments = "(args)"  The resulting values passed to the NodeC executable are: Nairo Quintana Chris Froome  ### Using special macros within a definition¶ The (JOB) and (RETRY) macros may be used within a definition of the string that defines a variable. This usage requires parentheses, such that proper macro substitution may take place when the macro’s value is only a portion of the string. • (JOB) expands to the node JobName. If the VARS line appears in a DAG file used as a splice file, then (JOB) will be the fully scoped name of the node. For example, the DAG input file lines JOB NodeC NodeC.submit VARS NodeC nodename="(JOB)"  set nodename to NodeC, and the DAG input file lines JOB NodeD NodeD.submit VARS NodeD outfilename="(JOB)-output"  set outfilename to NodeD-output. • (RETRY) expands to 0 the first time a node is run; the value is incremented each time the node is retried. For example: VARS NodeE noderetry="(RETRY)"  ### Using VARS to define ClassAd attributes¶ The macroname may also begin with a + character, in which case it names a ClassAd attribute. For example, the VARS specification VARS NodeF +A="\"bob\""  results in the job ClassAd attribute A = "bob"  Note that ClassAd string values must be quoted, hence there are escaped quotes in the example above. The outer quotes are consumed in the parsing of the DAG input file, so the escaped inner quotes remain in the definition of the attribute value. Continuing this example, it allows the HTCondor submit description file for NodeF to use the following line: arguments = "$$([A])"  The special macros may also be used. For example VARS NodeG +B="$(RETRY)"


places the numerical attribute

B = 1


into the ClassAd when the NodeG job is run for a second time, which is the first retry and the value 1.

### Setting Priorities for Nodes¶

The PRIORITY command assigns a priority to a DAG node (and to the HTCondor job(s) associated with the node). The syntax for PRIORITY is

PRIORITY [JobName | ALL_NODES] PriorityValue


The priority value is an integer (which can be negative). A larger numerical priority is better. The default priority is 0.

The node priority affects the order in which nodes that are ready (all of their parent nodes have finished successfully) at the same time will be submitted. The node priority also sets the node job’s priority in the queue (that is, its JobPrio attribute), which affects the order in which jobs will be run once they are submitted (see Job Priority for more information). The node priority only affects the order of job submission within a given DAG; but once jobs are submitted, their JobPrio value affects the order in which they will be run relative to all jobs submitted by the same user.

Sub-DAGs can have priorities, just as “regular” nodes can. (The priority of a sub-DAG will affect the priorities of its nodes: see “effective node priorities” below.) Splices cannot be assigned a priority, but individual nodes within a splice can be assigned priorities.

Note that node priority does not override the DAG dependencies. Also note that node priorities are not guarantees of the relative order in which nodes will be run, even among nodes that become ready at the same time - so node priorities should not be used as a substitute for parent/child dependencies. In other words, priorities should be used when it is preferable, but not required, that some jobs run before others. (The order in which jobs are run once they are submitted can be affected by many things other than the job’s priority; for example, whether there are machines available in the pool that match the job’s requirements.)

PRE scripts can affect the order in which jobs run, so DAGs containing PRE scripts may not submit the nodes in exact priority order, even if doing so would satisfy the DAG dependencies.

Node priority is most relevant if node submission is throttled (via the -maxjobs or -maxidle command-line arguments or the DAGMAN_MAX_JOBS_SUBMITTED or DAGMAN_MAX_JOBS_IDLE configuration variables), or if there are not enough resources in the pool to immediately run all submitted node jobs. This is often the case for DAGs with large numbers of “sibling” nodes, or DAGs running on heavily-loaded pools.

Example

Adding PRIORITY for node C in the diamond-shaped DAG:

# File name: diamond.dag

JOB  A  A.condor
JOB  B  B.condor
JOB  C  C.condor
JOB  D  D.condor
PARENT A CHILD B C
PARENT B C CHILD D
RETRY  C 3
PRIORITY C 1


This will cause node C to be submitted (and, mostly likely, run) before node B. Without this priority setting for node C, node B would be submitted first because the “JOB” statement for node B comes earlier in the DAG file than the “JOB” statement for node C.

### Effective node priorities¶

The “effective” priority for a node (the priority controlling the order in which nodes are actually submitted, and which is assigned to JobPrio) is the sum of the explicit priority (specified in the DAG file) and the priority of the DAG itself. DAG priorities also default to 0, so they are most relevant for sub-DAGs (although a top-level DAG can be submitted with a non-zero priority by specifying a -priority value on the condor_submit_dag command line). This algorithm for calculating effective priorities is a simplification introduced in version 8.5.7 (a node’s effective priority is no longer dependent on the priorities of its parents).

Here is an example to clarify:

# File name: priorities.dag

JOB A A.sub
SUBDAG EXTERNAL B SD.dag
PARENT A CHILD B
PRIORITY A 60
PRIORITY B 100

# File name: SD.dag

JOB SA SA.sub
JOB SB SB.sub
PARENT SA CHILD SB
PRIORITY SA 10
PRIORITY SB 20


In this example (assuming that priorities.dag is submitted with the default priority of 0), the effective priority of node A will be 60, and the effective priority of sub-DAG B will be 100. Therefore, the effective priority of node SA will be 110 and the effective priority of node SB will be 120.

The effective priorities listed above are assigned by DAGMan. There is no way to change the priority in the submit description file for a job, as DAGMan will override any priority command placed in a submit description file (unless the effective node priority is 0; in this case, any priority specified in the submit file will take effect).

### Throttling Nodes by Category¶

In order to limit the number of submitted job clusters within a DAG, the nodes may be placed into categories by assignment of a name. Then, a maximum number of submitted clusters may be specified for each category.

The CATEGORY command assigns a category name to a DAG node. The syntax for CATEGORY is

CATEGORY [JobName | ALL_NODES] CategoryName


Category names cannot contain white space.

The MAXJOBS command limits the number of submitted job clusters on a per category basis. The syntax for MAXJOBS is

MAXJOBS CategoryName MaxJobsValue


If the number of submitted job clusters for a given category reaches the limit, no further job clusters in that category will be submitted until other job clusters within the category terminate. If MAXJOBS is not set for a defined category, then there is no limit placed on the number of submissions within that category.

Note that a single invocation of condor_submit results in one job cluster. The number of HTCondor jobs within a cluster may be greater than 1.

The configuration variable DAGMAN_MAX_JOBS_SUBMITTED and the condor_submit_dag -maxjobs command-line option are still enforced if these CATEGORY and MAXJOBS throttles are used.

Please see the end of Advanced Features of DAGMan on DAG Splicing for a description of the interaction between categories and splices.

### Configuration Specific to a DAG¶

All configuration variables and their definitions that relate to DAGMan may be found in ref:admin-manual/configuration-macros:configuration file entries for dagman.

Configuration variables for condor_dagman can be specified in several ways, as given within the ordered list:

1. In an HTCondor configuration file.

2. With an environment variable. Prepend the string _CONDOR_ to the configuration variable’s name.

3. With a line in the DAG input file using the keyword CONFIG, such that there is a configuration file specified that is specific to an instance of condor_dagman. The configuration file specification may instead be specified on the condor_submit_dag command line using the -config option.

4. For some configuration variables, condor_submit_dag command line argument specifies a configuration variable. For example, the configuration variable DAGMAN_MAX_JOBS_SUBMITTED has the corresponding command line argument -maxjobs.

For this ordered list, configuration values specified or parsed later in the list override ones specified earlier. For example, a value specified on the condor_submit_dag command line overrides corresponding values in any configuration file. And, a value specified in a DAGMan-specific configuration file overrides values specified in a general HTCondor configuration file.

The CONFIG command within the DAG input file specifies a configuration file to be used to set configuration variables related to condor_dagman when running this DAG. The syntax for CONFIG is

CONFIG ConfigFileName

As an example, if the DAG input file contains:

CONFIG dagman.config


then the configuration values in file dagman.config will be used for this DAG. If the contents of file dagman.config is

DAGMAN_MAX_JOBS_IDLE = 10


then this configuration is defined for this DAG.

Only a single configuration file can be specified for a given condor_dagman run. For example, if one file is specified within a DAG input file, and a different file is specified on the condor_submit_dag command line, this is a fatal error at submit time. The same is true if different configuration files are specified in multiple DAG input files and referenced in a single condor_submit_dag command.

If multiple DAGs are run in a single condor_dagman run, the configuration options specified in the condor_dagman configuration file, if any, apply to all DAGs, even if some of the DAGs specify no configuration file.

Configuration variables that are not for condor_dagman and not utilized by DaemonCore, yet are specified in a condor_dagman-specific configuration file are ignored.

### Setting ClassAd attributes in the DAG file¶

The SET_JOB_ATTR keyword within the DAG input file specifies an attribute/value pair to be set in the DAGMan job’s ClassAd. The syntax for SET_JOB_ATTR is

SET_JOB_ATTR AttributeName = AttributeValue


As an example, if the DAG input file contains:

SET_JOB_ATTR TestNumber = 17


the ClassAd of the DAGMan job itself will have an attribute TestNumber with the value 17.

The attribute set by the SET_JOB_ATTR command is set only in the ClassAd of the DAGMan job itself - it is not propagated to node jobs of the DAG.

Values with spaces can be set by surrounding the string containing a space with single or double quotes. (Note that the quote marks themselves will be part of the value.)

Only a single attribute/value pair can be specified per SET_JOB_ATTR command. If the same attribute is specified multiple times in the DAG (or in multiple DAGs run by the same DAGMan instance) the last-specified value is the one that will be utilized. An attribute set in the DAG file can be overridden by specifying

-append '+<attribute> = <value>'


on the condor_submit_dag command line.

### Optimization of Submission Time¶

condor_dagman works by watching log files for events, such as submission, termination, and going on hold. When a new job is ready to be run, it is submitted to the condor_schedd, which needs to acquire a computing resource. Acquisition requires the condor_schedd to contact the central manager and get a claim on a machine, and this claim cycle can take many minutes.

Configuration variable DAGMAN_HOLD_CLAIM_TIME avoids the wait for a negotiation cycle. When set to a non zero value, the condor_schedd keeps a claim idle, such that the condor_startd delays in shifting from the Claimed to the Preempting state (see Policy Configuration for Execute Hosts and for Submit Hosts). Thus, if another job appears that is suitable for the claimed resource, then the condor_schedd will submit the job directly to the condor_startd, avoiding the wait and overhead of a negotiation cycle. This results in a speed up of job completion, especially for linear DAGs in pools that have lengthy negotiation cycle times.

By default, DAGMAN_HOLD_CLAIM_TIME is 20, causing a claim to remain idle for 20 seconds, during which time a new job can be submitted directly to the already-claimed condor_startd. A value of 0 means that claims are not held idle for a running DAG. If a DAG node has no children, the value of DAGMAN_HOLD_CLAIM_TIME will be ignored; the KeepClaimIdle attribute will not be defined in the job ClassAd of the node job, unless the job requests it using the submit command keep_claim_idle .

### Single Submission of Multiple, Independent DAGs¶

A single use of condor_submit_dag may execute multiple, independent DAGs. Each independent DAG has its own, distinct DAG input file. These DAG input files are command-line arguments to condor_submit_dag.

Internally, all of the independent DAGs are combined into a single, larger DAG, with no dependencies between the original independent DAGs. As a result, any generated Rescue DAG file represents all of the original independent DAGs with a single DAG. The file name of this Rescue DAG is based on the DAG input file listed first within the command-line arguments. For example, assume that three independent DAGs are submitted with

$condor_submit_dag A.dag B.dag C.dag  The first listed is A.dag. The remainder of the specialized file name adds a suffix onto this first DAG input file name, A.dag. The suffix is _multi.rescue<XXX>, where <XXX> is substituted by the 3-digit number of the Rescue DAG created as defined in The Rescue DAG section. The first time a Rescue DAG is created for the example, it will have the file name A.dag_multi.rescue001. Other files such as dagman.out and the lock file also have names based on this first DAG input file. The success or failure of the independent DAGs is well defined. When multiple, independent DAGs are submitted with a single command, the success of the composite DAG is defined as the logical AND of the success of each independent DAG. This implies that failure is defined as the logical OR of the failure of any of the independent DAGs. By default, DAGMan internally renames the nodes to avoid node name collisions. If all node names are unique, the renaming of nodes may be disabled by setting the configuration variable DAGMAN_MUNGE_NODE_NAMES to False (see ref:admin-manual/configuration-macros:configuration file entries for dagman). ### INCLUDE¶ The INCLUDE command allows the contents of one DAG file to be parsed as if they were physically included in the referencing DAG file. The syntax for INCLUDE is INCLUDE FileName  For example, if we have two DAG files like this: # File name: foo.dag JOB A A.sub INCLUDE bar.dag  # File name: bar.dag JOB B B.sub JOB C C.sub  this is equivalent to the single DAG file: JOB A A.sub JOB B B.sub JOB C C.sub  Note that the included file must be in proper DAG syntax. Also, there are many cases where a valid included DAG file will cause a parse error, such as the including and included files defining nodes with the same name. INCLUDE s can be nested to any depth (be sure not to create a cycle of includes!). ### Example: Using INCLUDE to simplify multiple similar workflows¶ One use of the INCLUDE command is to simplify the DAG files when we have a single workflow that we want to run on a number of data sets. In that case, we can do something like this: # File name: workflow.dag # Defines the structure of the workflow JOB Split split.sub JOB Process00 process.sub ... JOB Process99 process.sub JOB Combine combine.sub PARENT Split CHILD Process00 ... Process99 PARENT Process00 ... Process99 CHILD Combine  # File name: split.sub executable = my_split input =$(dataset).phase1
output = $(dataset).phase2 ...  # File name: data57.vars VARS Split dataset="data57" VARS Process00 dataset="data57" ... VARS Process99 dataset="data57" VARS Combine dataset="data57"  # File name: run_dataset57.dag INCLUDE workflow.dag INCLUDE data57.vars  Then, to run our workflow on dataset 57, we run the following command: $ condor_submit_dag run_dataset57.dag


This avoids having to duplicate the JOB and PARENT/CHILD commands for every dataset - we can just re-use the workflow.dag file, in combination with a dataset-specific vars file.

### Composing workflows from multiple DAG files¶

The organization and dependencies of the jobs within a DAG are the keys to its utility. Some workflows are naturally constructed hierarchically, such that a node within a DAG is also a DAG (instead of a “simple” HTCondor job). HTCondor DAGMan handles this situation easily, and allows DAGs to be nested to any depth.

There are two ways that DAGs can be nested within other DAGs: sub-DAGs and splices (see Advanced Features of DAGMan)

With sub-DAGs, each DAG has its own condor_dagman job, which then becomes a node job within the higher-level DAG. With splices, on the other hand, the nodes of the spliced DAG are directly incorporated into the higher-level DAG. Therefore, splices do not result in additional condor_dagman instances.

A weakness in scalability exists when submitting external sub-DAGs, because each executing independent DAG requires its own instance of condor_dagman to be running. The outer DAG has an instance of condor_dagman, and each named SUBDAG has an instance of condor_dagman while it is in the HTCondor queue. The scaling issue presents itself when a workflow contains hundreds or thousands of sub-DAGs that are queued at the same time. (In this case, the resources (especially memory) consumed by the multiple condor_dagman instances can be a problem.) Further, there may be many Rescue DAGs created if a problem occurs. (Note that the scaling issue depends only on how many sub-DAGs are queued at any given time, not the total number of sub-DAGs in a given workflow; division of a large workflow into sequential sub-DAGs can actually enhance scalability.) To alleviate these concerns, the DAGMan language introduces the concept of graph splicing.

Because splices are simpler in some ways than sub-DAGs, they are generally preferred unless certain features are needed that are only available with sub-DAGs. This document: https://htcondor-wiki.cs.wisc.edu/index.cgi/wiki?p=SubDagsVsSplices explains the pros and cons of splices and external sub-DAGs, and should help users decide which alternative is better for their application.

Note that sub-DAGs and splices can be combined in a single workflow, and can be nested to any depth (but be sure to avoid recursion, which will cause problems!).

### A DAG Within a DAG Is a SUBDAG¶

As stated above, the SUBDAG EXTERNAL command causes the specified DAG file to be run by a separate instance of condor_dagman, with the condor_dagman job becoming a node job within the higher-level DAG.

The syntax for the SUBDAG command is

SUBDAG EXTERNAL JobName DagFileName [DIR directory] [NOOP] [DONE]


The optional specifications of DIR, NOOP, and DONE, if used, must appear in this order within the entry. NOOP and DONE for SUBDAG nodes have the same effect that they do for JOB nodes.

A SUBDAG node is essentially the same as any other node, except that the DAG input file for the inner DAG is specified, instead of the HTCondor submit file. The keyword EXTERNAL means that the SUBDAG is run within its own instance of condor_dagman.

Since more than one DAG is being discussed, here is terminology introduced to clarify which DAG is which. Reuse the example diamond-shaped DAG as given in the following description. Assume that node B of this diamond-shaped DAG will itself be a DAG. The DAG of node B is called a SUBDAG, inner DAG, or lower-level DAG. The diamond-shaped DAG is called the outer or top-level DAG.

Work on the inner DAG first. Here is a very simple linear DAG input file used as an example of the inner DAG.

# File name: inner.dag

JOB  X  X.submit
JOB  Y  Y.submit
JOB  Z  Z.submit
PARENT X CHILD Y
PARENT Y CHILD Z


The HTCondor submit description file, used by condor_dagman, corresponding to inner.dag will be named inner.dag.condor.sub. The DAGMan submit description file is always named <DAG file name>.condor.sub. Each DAG or SUBDAG results in the submission of condor_dagman as an HTCondor job, and condor_submit_dag creates this submit description file.

The preferred specification of the DAG input file for the outer DAG is

# File name: diamond.dag

JOB  A  A.submit
SUBDAG EXTERNAL  B  inner.dag
JOB  C  C.submit
JOB  D  D.submit
PARENT A CHILD B C
PARENT B C CHILD D


Within the outer DAG’s input file, the SUBDAG command specifies a special case of a JOB node, where the job is itself a DAG.

One of the benefits of using the SUBDAG feature is that portions of the overall workflow can be constructed and modified during the execution of the DAG (a SUBDAG file doesn’t have to exist until just before it is submitted). A drawback can be that each SUBDAG causes its own distinct job submission of condor_dagman, leading to a larger number of jobs, together with their potential need of carefully constructed policy configuration to throttle node submission or execution (because each SUBDAG has its own throttles).

Here are details that affect SUBDAGs:

• Nested DAG Submit Description File Generation

There are three ways to generate the <DAG file name>.condor.sub file of a SUBDAG:

• Lazily (the default in HTCondor version 7.5.2 and later versions)

• Eagerly (the default in HTCondor versions 7.4.1 through 7.5.1)

• Manually (the only way prior to version HTCondor version 7.4.1)

When the <DAG file name>.condor.sub file is generated lazily, this file is generated immediately before the SUBDAG job is submitted. Generation is accomplished by running

$condor_submit_dag -no_submit  on the DAG input file specified in the SUBDAG entry. This is the default behavior. There are advantages to this lazy mode of submit description file creation for the SUBDAG: • The DAG input file for a SUBDAG does not have to exist until the SUBDAG is ready to run, so this file can be dynamically created by earlier parts of the outer DAG or by the PRE script of the node containing the SUBDAG. • It is now possible to have SUBDAGs within splices. That is not possible with eager submit description file creation, because condor_submit_dag does not understand splices. The main disadvantage of lazy submit file generation is that a syntax error in the DAG input file of a SUBDAG will not be discovered until the outer DAG tries to run the inner DAG. When <DAG file name>.condor.sub files are generated eagerly, condor_submit_dag runs itself recursively (with the -no_submit option) on each SUBDAG, so all of the <DAG file name>.condor.sub files are generated before the top-level DAG is actually submitted. To generate the <DAG file name>.condor.sub files eagerly, pass the -do_recurse flag to condor_submit_dag; also set the DAGMAN_GENERATE_SUBDAG_SUBMITS configuration variable to False, so that condor_dagman does not re-run condor_submit_dag at run time thereby regenerating the submit description files. To generate the .condor.sub files manually, run $ condor_submit_dag -no_submit


on each lower-level DAG file, before running condor_submit_dag on the top-level DAG file; also set the DAGMAN_GENERATE_SUBDAG_SUBMITS configuration variable to False, so that condor_dagman does not re-run condor_submit_dag at run time. The main reason for generating the <DAG file name>.condor.sub files manually is to set options for the lower-level DAG that one would not otherwise be able to set An example of this is the -insert_sub_file option. For instance, using the given example do the following to manually generate HTCondor submit description files:

$condor_submit_dag -no_submit -insert_sub_file fragment.sub inner.dag$ condor_submit_dag diamond.dag


Note that most condor_submit_dag command-line flags have corresponding configuration variables, so we encourage the use of per-DAG configuration files, especially in the case of nested DAGs. This is the easiest way to set different options for different DAGs in an overall workflow.

It is possible to combine more than one method of generating the <DAG file name>.condor.sub files. For example, one might pass the -do_recurse flag to condor_submit_dag, but leave the DAGMAN_GENERATE_SUBDAG_SUBMITS configuration variable set to the default of True. Doing this would provide the benefit of an immediate error message at submit time, if there is a syntax error in one of the inner DAG input files, but the lower-level <DAG file name>.condor.sub files would still be regenerated before each nested DAG is submitted.

The values of the following command-line flags are passed from the top-level condor_submit_dag instance to any lower-level condor_submit_dag instances. This occurs whether the lower-level submit description files are generated lazily or eagerly:

• -verbose

• -force

• -allowlogerror

• -dagman

• -usedagdir

• -outfile_dir

• -oldrescue

• -autorescue

• -dorescuefrom

• -allowversionmismatch

• -no_recurse/do_recurse

• -update_submit

• -import_env

• -priority

• -dont_use_default_node_log

The values of the following command-line flags are preserved in any already-existing lower-level DAG submit description files:

• -maxjobs

• -maxidle

• -maxpre

• -maxpost

• -debug

Other command-line arguments are set to their defaults in any lower-level invocations of condor_submit_dag.

The -force option will cause existing DAG submit description files to be overwritten without preserving any existing values.

• Submission of the outer DAG

The outer DAG is submitted as before, with the command

$condor_submit_dag diamond.dag  • Interaction with Rescue DAGs The use of new-style Rescue DAGs is now the default. With new-style rescue DAGs, the appropriate rescue DAG(s) will be run automatically if there is a failure somewhere in the workflow. For example (given the DAGs in the example at the beginning of the SUBDAG section), if one of the nodes in inner.dag fails, this will produce a Rescue DAG for inner.dag (named inner.dag.rescue.001). Then, since inner.dag failed, node B of diamond.dag will fail, producing a Rescue DAG for diamond.dag (named diamond.dag.rescue.001, etc.). If the command $ condor_submit_dag diamond.dag


is re-run, the most recent outer Rescue DAG will be run, and this will re-run the inner DAG, which will in turn run the most recent inner Rescue DAG.

• File Paths

Remember that, unless the DIR keyword is used in the outer DAG, the inner DAG utilizes the current working directory when the outer DAG is submitted. Therefore, all paths utilized by the inner DAG file must be specified accordingly.

### DAG Splicing¶

As stated above, the SPLICE command causes the nodes of the spliced DAG to be directly incorporated into the higher-level DAG (the DAG containing the SPLICE command).

The syntax for the SPLICE command is

SPLICE SpliceName DagFileName [DIR directory]


A splice is a named instance of a subgraph which is specified in a separate DAG file. The splice is treated as an entity for dependency specification in the including DAG. (Conceptually, a splice is treated as a node within the DAG containing the SPLICE command, although there are some limitations, which are discussed below. This means, for example, that splices can have parents and children.) A splice can also be incorporated into an including DAG without any dependencies; it is then considered a disjoint DAG within the including DAG.

The same DAG file can be reused as differently named splices, each one incorporating a copy of the dependency graph (and nodes therein) into the including DAG.

The nodes within a splice are scoped according to a hierarchy of names associated with the splices, as the splices are parsed from the top level DAG file. The scoping character to describe the inclusion hierarchy of nodes into the top level dag is ‘+’. (In other words, if a splice named “SpliceX” contains a node named “NodeY”, the full node name once the DAGs are parsed is “SpliceX+NodeY”. This character is chosen due to a restriction in the allowable characters which may be in a file name across the variety of platforms that HTCondor supports. In any DAG input file, all splices must have unique names, but the same splice name may be reused in different DAG input files.

HTCondor does not detect nor support splices that form a cycle within the DAG. A DAGMan job that causes a cyclic inclusion of splices will eventually exhaust available memory and crash.

The SPLICE command in a DAG input file creates a named instance of a DAG as specified in another file as an entity which may have PARENT and CHILD dependencies associated with other splice names or node names in the including DAG file.

The following series of examples illustrate potential uses of splicing. To simplify the examples, presume that each and every job uses the same, simple HTCondor submit description file:

# BEGIN SUBMIT FILE submit.condor
executable   = /bin/echo
arguments    = OK
universe     = vanilla
output       = $(jobname).out error =$(jobname).err
log          = submit.log
queue
# END SUBMIT FILE submit.condor


This first simple example splices a diamond-shaped DAG in between the two nodes of a top level DAG. Here is the DAG input file for the diamond-shaped DAG:

# BEGIN DAG FILE diamond.dag
JOB A submit.condor
VARS A jobname="$(JOB)" JOB B submit.condor VARS B jobname="$(JOB)"

JOB C submit.condor
VARS C jobname="$(JOB)" JOB D submit.condor VARS D jobname="$(JOB)"

PARENT A CHILD B C
PARENT B C CHILD D
# END DAG FILE diamond.dag


The top level DAG incorporates the diamond-shaped splice:

# BEGIN DAG FILE toplevel.dag
JOB X submit.condor
VARS X jobname="$(JOB)" JOB Y submit.condor VARS Y jobname="$(JOB)"

# This is an instance of diamond.dag, given the symbolic name DIAMOND
SPLICE DIAMOND diamond.dag

# Set up a relationship between the nodes in this dag and the splice

PARENT X CHILD DIAMOND
PARENT DIAMOND CHILD Y

# END DAG FILE toplevel.dag


The following example illustrates the resulting top level DAG and the dependencies produced. Notice the naming of nodes scoped with the splice name. This hierarchy of splice names assures unique names associated with all nodes.

The diamond-shaped DAG spliced between two nodes.

The next example illustrates the starting point for a more complex example. The DAG input file X.dag describes this X-shaped DAG. The completed example displays more of the spatial constructs provided by splices. Pay particular attention to the notion that each named splice creates a new graph, even when the same DAG input file is specified.

# BEGIN DAG FILE X.dag

JOB A submit.condor
VARS A jobname="$(JOB)" JOB B submit.condor VARS B jobname="$(JOB)"

JOB C submit.condor
VARS C jobname="$(JOB)" JOB D submit.condor VARS D jobname="$(JOB)"

JOB E submit.condor
VARS E jobname="$(JOB)" JOB F submit.condor VARS F jobname="$(JOB)"

JOB G submit.condor
VARS G jobname="$(JOB)" # Make an X-shaped dependency graph PARENT A B C CHILD D PARENT D CHILD E F G # END DAG FILE X.dag  The X-shaped DAG. File s1.dag continues the example, presenting the DAG input file that incorporates two separate splices of the X-shaped DAG. The next description illustrates the resulting DAG. # BEGIN DAG FILE s1.dag JOB A submit.condor VARS A jobname="$(JOB)"

JOB B submit.condor
VARS B jobname="$(JOB)" # name two individual splices of the X-shaped DAG SPLICE X1 X.dag SPLICE X2 X.dag # Define dependencies # A must complete before the initial nodes in X1 can start PARENT A CHILD X1 # All final nodes in X1 must finish before # the initial nodes in X2 can begin PARENT X1 CHILD X2 # All final nodes in X2 must finish before B may begin. PARENT X2 CHILD B # END DAG FILE s1.dag  The DAG described by s1.dag. The top level DAG in the hierarchy of this complex example is described by the DAG input file toplevel.dag, which illustrates the final DAG. Notice that the DAG has two disjoint graphs in it as a result of splice S3 not having any dependencies associated with it in this top level DAG. # BEGIN DAG FILE toplevel.dag JOB A submit.condor VARS A jobname="$(JOB)"

JOB B submit.condor
VARS B jobname="$(JOB)" JOB C submit.condor VARS C jobname="$(JOB)"

JOB D submit.condor
VARS D jobname="$(JOB)" # a diamond-shaped DAG PARENT A CHILD B C PARENT B C CHILD D # This splice of the X-shaped DAG can only run after # the diamond dag finishes SPLICE S2 X.dag PARENT D CHILD S2 # Since there are no dependencies for S3, # the following splice is disjoint SPLICE S3 s1.dag # END DAG FILE toplevel.dag  The complex splice example DAG. ### Splices and rescue DAGs¶ Because the nodes of a splice are directly incorporated into the DAG containing the SPLICE command, splices do not generate their own rescue DAGs, unlike SUBDAG EXTERNALs. The DIR option with splices The DIR option specifies a working directory for a splice, from which the splice will be parsed and the jobs within the splice submitted. The directory associated with the splice’s DIR specification will be propagated as a prefix to all nodes in the splice and any included splices. If a node already has a DIR specification, then the splice’s DIR specification will be a prefix to the node’s, separated by a directory separator character. Jobs in included splices with an absolute path for their DIR specification will have their DIR specification untouched. Note that a DAG containing DIR specifications cannot be run in conjunction with the -usedagdir command-line argument to condor_submit_dag. A “full” rescue DAG generated by a DAG run with the -usedagdir argument will contain DIR specifications, so such a rescue DAG must be run without the -usedagdir argument. (Note that “full” rescue DAGs are no longer the default.) Limitation: splice DAGs must exist at submit time Unlike the DAG files referenced in a SUBDAG EXTERNAL command, DAG files referenced in a SPLICE command must exist when the DAG containing the SPLICE command is submitted. (Note that, if a SPLICE is contained within a sub-DAG, the splice DAG must exist at the time that the sub-DAG is submitted, not when the top-most DAG is submitted, so the splice DAG can be created by a part of the workflow that runs before the relevant sub-DAG.) Limitation: Splices and PRE or POST Scripts A PRE or POST script may not be specified for a splice (however, nodes within a spliced DAG can have PRE and POST scripts). (The reason for this is that, when the DAG is parsed, the splices are also parsed and the splice nodes are directly incorporated into the DAG containing the SPLICE command. Therefore, once parsing is complete, there are no actual nodes corresponding to the splice itself to which to “attach” the PRE or POST scripts.) To achieve the desired effect of having a PRE script associated with a splice, introduce a new NOOP node into the DAG with the splice as a dependency. Attach the PRE script to the NOOP node. # BEGIN DAG FILE example1.dag # Names a node with no associated node job, a NOOP node # Note that the file noop.submit does not need to exist JOB OnlyPreNode noop.submit NOOP # Attach a PRE script to the NOOP node SCRIPT PRE OnlyPreNode prescript.sh # Define the splice SPLICE TheSplice thenode.dag # Define the dependency PARENT OnlyPreNode CHILD TheSplice # END DAG FILE example1.dag  The same technique is used to achieve the effect of having a POST script associated with a splice. Introduce a new NOOP node into the DAG as a child of the splice, and attach the POST script to the NOOP node. # BEGIN DAG FILE example2.dag # Names a node with no associated node job, a NOOP node # Note that the file noop.submit does not need to exist. JOB OnlyPostNode noop.submit NOOP # Attach a POST script to the NOOP node SCRIPT POST OnlyPostNode postscript.sh # Define the splice SPLICE TheSplice thenode.dag # Define the dependency PARENT TheSplice CHILD OnlyPostNode # END DAG FILE example2.dag  Limitation: Splices and the RETRY of a Node, use of VARS, or use of PRIORITY A RETRY, VARS or PRIORITY command cannot be specified for a SPLICE; however, individual nodes within a spliced DAG can have a RETRY, VARS or PRIORITY specified. Here is an example showing a DAG that will not be parsed successfully: # top level DAG input file JOB A a.sub SPLICE B b.dag PARENT A CHILD B # cannot work, as B is not a node in the DAG once # splice B is incorporated RETRY B 3 VARS B dataset="10" PRIORITY B 20  The following example will work: # top level DAG input file JOB A a.sub SPLICE B b.dag PARENT A CHILD B # file: b.dag JOB X x.sub RETRY X 3 VARS X dataset="10" PRIORITY X 20  When RETRY is desired on an entire subgraph of a workflow, sub-DAGs (see above) must be used instead of splices. Here is the same example, now defining job B as a SUBDAG, and effecting RETRY on that SUBDAG. # top level DAG input file JOB A a.sub SUBDAG EXTERNAL B b.dag PARENT A CHILD B RETRY B 3  Limitation: The Interaction of Categories and MAXJOBS with Splices Categories normally refer only to nodes within a given splice. All of the assignments of nodes to a category, and the setting of the category throttle, should be done within a single DAG file. However, it is now possible to have categories include nodes from within more than one splice. To do this, the category name is prefixed with the ‘+’ (plus) character. This tells DAGMan that the category is a cross-splice category. Towards deeper understanding, what this really does is prevent renaming of the category when the splice is incorporated into the upper-level DAG. The MAXJOBS specification for the category can appear in either the upper-level DAG file or one of the splice DAG files. It probably makes the most sense to put it in the upper-level DAG file. Here is an example which applies a single limitation on submitted jobs, identifying the category with +init. # relevant portion of file name: upper.dag SPLICE A splice1.dag SPLICE B splice2.dag MAXJOBS +init 2  # relevant portion of file name: splice1.dag JOB C C.sub CATEGORY C +init JOB D D.sub CATEGORY D +init  # relevant portion of file name: splice2.dag JOB X X.sub CATEGORY X +init JOB Y Y.sub CATEGORY Y +init  For both global and non-global category throttles, settings at a higher level in the DAG override settings at a lower level. In this example: # relevant portion of file name: upper.dag SPLICE A lower.dag MAXJOBS A+catX 10 MAXJOBS +catY 2 # relevant portion of file name: lower.dag MAXJOBS catX 5 MAXJOBS +catY 1  the resulting throttle settings are 2 for the +catY category and 10 for the A+catX category in splice. Note that non-global category names are prefixed with their splice name(s), so to refer to a non-global category at a higher level, the splice name must be included. ### DAG Splice Connections¶ In the “default” usage of splices described above, when one splice is the parent of another splice, all “terminal” nodes (nodes with no children) of the parent splice become parents of all “initial” nodes (nodes with no parents) of the child splice. The CONNECT, PIN_IN, and PIN_OUT commands (added in version 8.5.7) allow more flexible dependencies between splices. (The terms PIN_IN and PIN_OUT were chosen because of the hardware analogy.) The syntax for CONNECT is CONNECT OutputSpliceName InputSpliceName  The syntax for PIN_IN is PIN_IN NodeName PinNumber  The syntax for PIN_OUT is PIN_OUT NodeName PinNumber  All output splice nodes connected to a given pin_out will become parents of all input splice nodes connected to the corresponding pin_in. (The pin_ins and pin_outs exist only to create the correct parent/child dependencies between nodes. Once the DAG is parsed, there are no actual DAG objects corresponding to the pin_ins and pin_outs.) Any given splice can contain both PIN_IN and PIN_OUT definitions, and can be both an input and output splice in different CONNECT commands. Furthermore, a splice can appear in any number of CONNECT commands (for example, a given splice could be the output splice in two CONNECT commands that have different input splices). It is not an error for a splice to have PIN_IN or PIN_OUT definitions that are not associated with a CONNECT command - such PIN_IN and PIN_OUT commands are simply ignored. Note that the pin_ins and pin_outs must be defined within the relevant splices (this can be done with INCLUDE commands), not in the DAG that connects the splices. There are a number of restrictions on splice connections: • Connections can be made only between two splices; “regular” nodes or sub-DAGs cannot be used in a CONNECT command. • Pin_ins and pin_outs must be numbered consecutively starting at 1. • The pin_outs of the output splice in a connect command must match the pin_ins of the input splice in the command. • All “initial” nodes (nodes with no parents) of an input splice used in a CONNECT command must be connected to a pin_in. Violating any of these restrictions will result in an error during the parsing of the DAG files. Note: it is probably desirable for any “terminal” node (a node with no children) in the output splice to be connected to a pin_out - but this is not required. Here is a simple example: # File: top.dag SPLICE A spliceA.dag SPLICE B spliceB.dag SPLICE C spliceC.dag CONNECT A B CONNECT B C  # File: spliceA.dag JOB A1 A1.sub JOB A2 A2.sub PIN_OUT A1 1 PIN_OUT A2 2  # File: spliceB.dag JOB B1 B1.sub JOB B2 B2.sub JOB B3 B3.sub JOB B4 B4.sub PIN_IN B1 1 PIN_IN B2 1 PIN_IN B3 2 PIN_IN B4 2 PIN_OUT B1 1 PIN_OUT B2 2 PIN_OUT B3 3 PIN_OUT B4 4  # File: spliceC.dag JOB C1 C1.sub PIN_IN C1 1 PIN_IN C1 2 PIN_IN C1 3 PIN_IN C1 4  In this example, node A1 will be the parent of B1 and B2; node A2 will be the parent of B3 and B4; and nodes B1, B2, B3 and B4 will all be parents of C1. A diagram of the above example: Diagram of the splice connect example ### FINAL node¶ A FINAL node is a single and special node that is always run at the end of the DAG, even if previous nodes in the DAG have failed. A FINAL node can be used for tasks such as cleaning up intermediate files and checking the output of previous nodes. The FINAL command in the DAG input file specifies a node job to be run at the end of the DAG. The syntax used for the FINAL command is FINAL JobName SubmitDescriptionFileName [DIR directory] [NOOP]  The FINAL node within the DAG is identified by JobName, and the HTCondor job is described by the contents of the HTCondor submit description file given by SubmitDescriptionFileName. The keywords DIR and NOOP are as detailed in Describing Workflows with DAGMan. If both DIR and NOOP are used, they must appear in the order shown within the syntax specification. There may only be one FINAL node in a DAG. A parse error will be logged by the condor_dagman job in the dagman.out file, if more than one FINAL node is specified. The FINAL node is virtually always run. It is run if the condor_dagman job is removed with condor_rm. The only case in which a FINAL node is not run is if the configuration variable DAGMAN_STARTUP_CYCLE_DETECT is set to True, and a cycle is detected at start up time. If DAGMAN_STARTUP_CYCLE_DETECT is set to False and a cycle is detected during the course of the run, the FINAL node will be run. The success or failure of the FINAL node determines the success or failure of the entire DAG, overriding the status of all previous nodes. This includes any status specified by any ABORT-DAG-ON specification that has taken effect. If some nodes of a DAG fail, but the FINAL node succeeds, the DAG will be considered successful. Therefore, it is important to be careful about setting the exit status of the FINAL node. The $DAG_STATUS and $FAILED_COUNT macros can be used both as PRE and POST script arguments, and in node job submit description files. As an example of this, here are the partial contents of the DAG input file, FINAL final_node final_node.sub SCRIPT PRE final_node final_pre.pl$DAG_STATUS $FAILED_COUNT  and here are the partial contents of the submit description file, final_node.sub arguments = "$(DAG_STATUS) $(FAILED_COUNT)"  If there is a FINAL node specified for a DAG, it will be run at the end of the workflow. If this FINAL node must not do anything in certain cases, use the $DAG_STATUS and $FAILED_COUNT macros to take appropriate actions. Here is an example of that behavior. It uses a PRE script that aborts if the DAG has been removed with condor_rm, which, in turn, causes the FINAL node to be considered failed without actually submitting the HTCondor job specified for the node. Partial contents of the DAG input file: FINAL final_node final_node.sub SCRIPT PRE final_node final_pre.pl$DAG_STATUS


and partial contents of the Perl PRE script, final_pre.pl:

#!/usr/bin/env perl

VARS ALL_NODES name="$(JOB)" # This overrides the above VARS command for node B. VARS B name="nodeB" RETRY all_nodes 3  ## The Rescue DAG¶ Any time a DAG exits unsuccessfully, DAGMan generates a Rescue DAG. The Rescue DAG records the state of the DAG, with information such as which nodes completed successfully, and the Rescue DAG will be used when the DAG is again submitted. With the Rescue DAG, nodes that have already successfully completed are not re-run. There are a variety of circumstances under which a Rescue DAG is generated. If a node in the DAG fails, the DAG does not exit immediately; the remainder of the DAG is continued until no more forward progress can be made based on the DAG’s dependencies. At this point, DAGMan produces the Rescue DAG and exits. A Rescue DAG is produced on Unix platforms if the condor_dagman job itself is removed with condor_rm. On Windows, a Rescue DAG is not generated in this situation, but re-submitting the original DAG will invoke a lower-level recovery functionality, and it will produce similar behavior to using a Rescue DAG. A Rescue DAG is produced when a node sets and triggers an ABORT-DAG-ON event with a non-zero return value. A zero return value constitutes successful DAG completion, and therefore a Rescue DAG is not generated. By default, if a Rescue DAG exists, it will be used when the DAG is submitted specifying the original DAG input file. If more than one Rescue DAG exists, the newest one will be used. By using the Rescue DAG, DAGMan will avoid re-running nodes that completed successfully in the previous run. Note that passing the -force option to condor_submit_dag or condor_dagman will cause condor_dagman to not use any existing rescue DAG. This means that previously-completed node jobs will be re-run. The granularity defining success or failure in the Rescue DAG is the node. For a node that fails, all parts of the node will be re-run, even if some parts were successful the first time. For example, if a node’s PRE script succeeds, but then the node’s HTCondor job cluster fails, the entire node, including the PRE script, will be re-run. A job cluster may result in the submission of multiple HTCondor jobs. If one of the jobs within the cluster fails, the node fails. Therefore, the Rescue DAG will re-run the entire node, implying the submission of the entire cluster of jobs, not just the one(s) that failed. Statistics about the failed DAG execution are presented as comments at the beginning of the Rescue DAG input file. ### Rescue DAG Naming¶ The file name of the Rescue DAG is obtained by appending the string .rescue<XXX> to the original DAG input file name. Values for <XXX> start at 001 and continue to 002, 003, and beyond. The configuration variable DAGMAN_MAX_RESCUE_NUM sets a maximum value for <XXX>; see Configuration File Entries for DAGMan for the complete definition of this configuration variable. If you hit the DAGMAN_MAX_RESCUE_NUM limit, the last Rescue DAG file is overwritten if the DAG fails again. If a Rescue DAG exists when the original DAG is re-submitted, the Rescue DAG with the largest magnitude value for <XXX> will be used, and its usage is implied. Example Here is an example showing file naming and DAG submission for the case of a failed DAG. The initial DAG is submitted with $ condor_submit_dag  my.dag


A failure of this DAG results in the Rescue DAG named my.dag.rescue001. The DAG is resubmitted using the same command:

$condor_submit_dag my.dag  This resubmission of the DAG uses the Rescue DAG file my.dag.rescue001, because it exists. Failure of this Rescue DAG results in another Rescue DAG called my.dag.rescue002. If the DAG is again submitted, using the same command as with the first two submissions, but not repeated here, then this third submission uses the Rescue DAG file my.dag.rescue002, because it exists, and because the value 002 is larger in magnitude than 001. ### Backtracking to an Older Rescue DAG¶ To explicitly specify a particular Rescue DAG, use the optional command-line argument -dorescuefrom with condor_submit_dag. Note that this will have the side effect of renaming existing Rescue DAG files with larger magnitude values of <XXX>. Each renamed file has its existing name appended with the string .old. For example, assume that my.dag has failed 4 times, resulting in the Rescue DAGs named my.dag.rescue001, my.dag.rescue002, my.dag.rescue003, and my.dag.rescue004. A decision is made to re-run using my.dag.rescue002. The submit command is $ condor_submit_dag  -dorescuefrom 2  my.dag


The DAG specified by the DAG input file my.dag.rescue002 is submitted. And, the existing Rescue DAG my.dag.rescue003 is renamed to be my.dag.rescue003.old, while the existing Rescue DAG my.dag.rescue004 is renamed to be my.dag.rescue004.old.

### Special Cases¶

Note that if multiple DAG input files are specified on the condor_submit_dag command line, a single Rescue DAG encompassing all of the input DAGs is generated. A DAG file containing splices also produces a single Rescue DAG file. On the other hand, a DAG containing sub-DAGs will produce a separate Rescue DAG for each sub-DAG that is queued (and for the top-level DAG).

If the Rescue DAG file is generated before all retries of a node are completed, then the Rescue DAG file will also contain RETRY entries. The number of retries will be set to the appropriate remaining number of retries. The configuration variable DAGMAN_RESET_RETRIES_UPON_RESCUE (ref:admin-manual/configuration-macros:configuration file entries for dagman), controls whether or not node retries are reset in a Rescue DAG.

### Partial versus Full Rescue DAGs¶

As of HTCondor version 7.7.2, the Rescue DAG file is a partial DAG file, not a complete DAG input file as in the past.

A partial Rescue DAG file contains only information about which nodes are done, and the number of retries remaining for nodes with retries. It does not contain information such as the actual DAG structure and the specification of the submit description file for each node job. Partial Rescue DAGs are automatically parsed in combination with the original DAG input file, which contains information about the DAG structure. This updated implementation means that a change in the original DAG input file, such as specifying a different submit description file for a node job, will take effect when running the partial Rescue DAG. In other words, you can fix mistakes in the original DAG file while still gaining the benefit of using the Rescue DAG.

To use a partial Rescue DAG, you must re-run condor_submit_dag on the original DAG file, not the Rescue DAG file.

Note that the existence of a DONE specification in a partial Rescue DAG for a node that no longer exists in the original DAG input file is a warning, as opposed to an error, unless the DAGMAN_USE_STRICT configuration variable is set to a value of 1 or higher (which is now the default). Comment out the line with DONE in the partial Rescue DAG file to avoid a warning or error.

The previous (prior to version 7.7.2) behavior of producing full DAG input file as the Rescue DAG is obtained by setting the configuration variable DAGMAN_WRITE_PARTIAL_RESCUE to the non-default value of False. Note that the option to generate full Rescue DAGs is likely to disappear some time during the 8.3 series.

To run a full Rescue DAG, either one left over from an older version of DAGMan, or one produced by setting DAGMAN_WRITE_PARTIAL_RESCUE to False, directly specify the full Rescue DAG file on the command line instead of the original DAG file. For example:

$condor_submit_dag my.dag.rescue002  Attempting to re-submit the original DAG file, if the Rescue DAG file is a complete DAG, will result in a parse failure. Rescue DAG Generated When There Are Parse Errors Starting in HTCondor version 7.5.5, passing the -DumpRescue option to either condor_dagman or condor_submit_dag causes condor_dagman to output a Rescue DAG file, even if the parsing of a DAG input file fails. In this parse failure case, condor_dagman produces a specially named Rescue DAG containing whatever it had successfully parsed up until the point of the parse error. This Rescue DAG may be useful in debugging parse errors in complex DAGs, especially ones using splices. This incomplete Rescue DAG is not meant to be used when resubmitting a failed DAG. Note that this incomplete Rescue DAG generated by the -DumpRescue option is a full DAG input file, as produced by versions of HTCondor prior to HTCondor version 7.7.2. It is not a partial Rescue DAG file, regardless of the value of the configuration variable DAGMAN_WRITE_PARTIAL_RESCUE . To avoid confusion between this incomplete Rescue DAG generated in the case of a parse failure and a usable Rescue DAG, a different name is given to the incomplete Rescue DAG. The name appends the string .parse_failed to the original DAG input file name. Therefore, if the submission of a DAG with $ condor_submit_dag  my.dag


has a parse failure, the resulting incomplete Rescue DAG will be named my.dag.parse_failed.

To further prevent one of these incomplete Rescue DAG files from being used, a line within the file contains the single command REJECT. This causes condor_dagman to reject the DAG, if used as a DAG input file. This is done because the incomplete Rescue DAG may be a syntactically correct DAG input file. It will be incomplete relative to the original DAG, such that if the incomplete Rescue DAG could be run, it could erroneously be perceived as having successfully executed the desired workflow, when, in fact, it did not.

## DAG Recovery¶

DAG recovery restores the state of a DAG upon resubmission. Recovery is accomplished by reading the .nodes.log file that is used to enforce the dependencies of the DAG. The DAG can then continue towards completion.

Recovery is different than a Rescue DAG. Recovery is appropriate when no Rescue DAG has been created. There will be no Rescue DAG if the machine running the condor_dagman job crashes, or if the condor_schedd daemon crashes, or if the condor_dagman job crashes, or if the condor_dagman job is placed on hold.

Much of the time, when a not-completed DAG is re-submitted, it will automatically be placed into recovery mode due to the existence and contents of a lock file created as the DAG is first run. In recovery mode, the .nodes.log is used to identify nodes that have completed and should not be re-submitted.

DAGMan can be told to work in recovery mode by including the -DoRecovery option on the command line, as in the example

$condor_submit_dag diamond.dag -DoRecovery  where diamond.dag is the name of the DAG input file. When debugging a DAG in which something has gone wrong, a first determination is whether a resubmission will use a Rescue DAG or benefit from recovery. The existence of a Rescue DAG means that recovery would be inappropriate. A Rescue DAG is has a file name ending in .rescue<XXX>, where <XXX> is replaced by a 3-digit number. Determine if a DAG ever completed (independent of whether it was successful or not) by looking at the last lines of the .dagman.out file. If there is a line similar to (condor_DAGMAN) pid 445 EXITING WITH STATUS 0  then the DAG completed. This line explains that the condor_dagman job finished normally. If there is no line similar to this at the end of the .dagman.out file, and output from condor_q shows that the condor_dagman job for the DAG being debugged is not in the queue, then recovery is indicated. ## Visualizing DAGs with dot¶ It can be helpful to see a picture of a DAG. DAGMan can assist you in visualizing a DAG by creating the input files used by the AT&T Research Labs graphviz package. dot is a program within this package, available from http://www.graphviz.org/, and it is used to draw pictures of DAGs. DAGMan produces one or more dot files as the result of an extra line in a DAG input file. The line appears as DOT dag.dot  This creates a file called dag.dot. which contains a specification of the DAG before any jobs within the DAG are submitted to HTCondor. The dag.dot file is used to create a visualization of the DAG by using this file as input to dot. This example creates a Postscript file, with a visualization of the DAG: $ dot -Tps dag.dot -o dag.ps


Within the DAG input file, the DOT command can take several optional parameters:

• UPDATE This will update the dot file every time a significant update happens.

• DONT-UPDATE Creates a single dot file, when the DAGMan begins executing. This is the default if the parameter UPDATE is not used.

• OVERWRITE Overwrites the dot file each time it is created. This is the default, unless DONT-OVERWRITE is specified.

• DONT-OVERWRITE Used to create multiple dot files, instead of overwriting the single one specified. To create file names, DAGMan uses the name of the file concatenated with a period and an integer. For example, the DAG input file line

DOT dag.dot DONT-OVERWRITE


causes files dag.dot.0, dag.dot.1, dag.dot.2, etc. to be created. This option is most useful when combined with the UPDATE option to visualize the history of the DAG after it has finished executing.

• INCLUDE path-to-filename Includes the contents of a file given by path-to-filename in the file produced by the DOT command. The include file contents are always placed after the line of the form label=. This may be useful if further editing of the created files would be necessary, perhaps because you are automatically visualizing the DAG as it progresses.

If conflicting parameters are used in a DOT command, the last one listed is used.

## Capturing the Status of Nodes in a File¶

DAGMan can capture the status of the overall DAG and all DAG nodes in a node status file, such that the user or a script can monitor this status. This file is periodically rewritten while the DAG runs. To enable this feature, the DAG input file must contain a line with the NODE_STATUS_FILE command.

The syntax for a NODE_STATUS_FILE command is

NODE_STATUS_FILE statusFileName [minimumUpdateTime] [ALWAYS-UPDATE]


The status file is written on the machine on which the DAG is submitted; its location is given by statusFileName, and it may be a full path and file name.

The optional minimumUpdateTime specifies the minimum number of seconds that must elapse between updates to the node status file. This setting exists to avoid having DAGMan spend too much time writing the node status file for very large DAGs. If no value is specified, this value defaults to 60 seconds (as of version 8.5.8; previously, it defaulted to 0). The node status file can be updated at most once per DAGMAN_USER_LOG_SCAN_INTERVAL , as defined in ref:admin-manual/configuration-macros:configuration file entries for dagman, no matter how small the minimumUpdateTime value. Also, the node status file will be updated when the DAG finishes, whether successfully or not, even if minimumUpdateTime seconds have not elapsed since the last update.

Normally, the node status file is only updated if the status of some nodes has changed since the last time the file was written. However, the optional ALWAYS-UPDATE keyword specifies that the node status file should be updated every time the minimum update time (and DAGMAN_USER_LOG_SCAN_INTERVAL ), has passed, even if no nodes have changed status since the last time the file was updated. (The file will change slightly, because timestamps will be updated.) For performance reasons, large DAGs with approximately 10,000 or more nodes are poor candidates for using the ALWAYS-UPDATE option.

As an example, if the DAG input file contains the line

NODE_STATUS_FILE my.dag.status 30


the file my.dag.status will be rewritten at intervals of 30 seconds or more.

This node status file is overwritten each time it is updated. Therefore, it only holds information about the current status of each node; it does not provide a history of the node status.

Changed in version 8.1.6: HTCondor version 8.1.6 changes the format of the node status file.

The node status file is a collection of ClassAds in New ClassAd format. There is one ClassAd for the overall status of the DAG, one ClassAd for the status of each node, and one ClassAd with the time at which the node status file was completed as well as the time of the next update.

Here is an example portion of a node status file:

[
Type = "DagStatus";
DagFiles = {
"job_dagman_node_status.dag"
};
Timestamp = 1399674138;
DagStatus = 3;
NodesTotal = 12;
NodesDone = 11;
NodesPre = 0;
NodesQueued = 1;
NodesPost = 0;
NodesFailed = 0;
JobProcsHeld = 0;
JobProcsIdle = 1;
]
[
Type = "NodeStatus";
Node = "A";
NodeStatus = 5;
StatusDetails = "";
RetryCount = 0;
JobProcsQueued = 0;
JobProcsHeld = 0;
]
...
[
Type = "NodeStatus";
Node = "C";
NodeStatus = 3;
StatusDetails = "idle";
RetryCount = 0;
JobProcsQueued = 1;
JobProcsHeld = 0;
]
[
Type = "StatusEnd";
EndTime = 1399674138;
NextUpdate = 1399674141;
]


Possible DagStatus and NodeStatus attribute values are:

• 0 (STATUS_NOT_READY): At least one parent has not yet finished or the node is a FINAL node.

• 1 (STATUS_READY): All parents have finished, but the node is not yet running.

• 2 (STATUS_PRERUN): The node’s PRE script is running.

• 3 (STATUS_SUBMITTED): The node’s HTCondor job(s) are in the queue.

• 4 (STATUS_POSTRUN): The node’s POST script is running.

• 5 (STATUS_DONE): The node has completed successfully.

• 6 (STATUS_ERROR): The node has failed.

A NODE_STATUS_FILE command inside any splice is ignored. If multiple DAG files are specified on the condor_submit_dag command line, and more than one specifies a node status file, the first specification takes precedence.

## A Machine-Readable Event History, the jobstate.log File¶

DAGMan can produce a machine-readable history of events. The jobstate.log file is designed for use by the Pegasus Workflow Management System, which operates as a layer on top of DAGMan. Pegasus uses the jobstate.log file to monitor the state of a workflow. The jobstate.log file can used by any automated tool for the monitoring of workflows.

DAGMan produces this file when the command JOBSTATE_LOG is in the DAG input file. The syntax for JOBSTATE_LOG is

JOBSTATE_LOG JobstateLogFileName

No more than one jobstate.log file can be created by a single instance of condor_dagman. If more than one jobstate.log file is specified, the first file name specified will take effect, and a warning will be printed in the dagman.out file when subsequent JOBSTATE_LOG specifications are parsed. Multiple specifications may exist in the same DAG file, within splices, or within multiple, independent DAGs run with a single condor_dagman instance.

The jobstate.log file can be considered a filtered version of the dagman.out file, in a machine-readable format. It contains the actual node job events that from condor_dagman, plus some additional meta-events.

The jobstate.log file is different from the node status file, in that the jobstate.log file is appended to, rather than being overwritten as the DAG runs. Therefore, it contains a history of the DAG, rather than a snapshot of the current state of the DAG.

There are 5 line types in the jobstate.log file. Each line begins with a Unix timestamp in the form of seconds since the Epoch. Fields within each line are separated by a single space character.

• DAGMan start: This line identifies the condor_dagman job. The formatting of the line is

timestamp INTERNAL \*** DAGMAN_STARTED dagmanCondorID \***


The dagmanCondorID field is the condor_dagman job’s ClusterId attribute, a period, and the ProcId attribute.

• DAGMan exit: This line identifies the completion of the condor_dagman job. The formatting of the line is

timestamp INTERNAL \*** DAGMAN_FINISHED exitCode \***


The exitCode field is value the condor_dagman job returns upon exit.

• Recovery started: If the condor_dagman job goes into recovery mode, this meta-event is printed. During recovery mode, events will only be printed in the file if they were not already printed before recovery mode started. The formatting of the line is

timestamp INTERNAL \*** RECOVERY_STARTED \***

• Recovery finished or Recovery failure: At the end of recovery mode, either a RECOVERY_FINISHED or RECOVERY_FAILURE meta-event will be printed, as appropriate. The formatting of the line is

timestamp INTERNAL \*** RECOVERY_FINISHED \***


or

timestamp INTERNAL \*** RECOVERY_FAILURE \***

• Normal: This line is used for all other event and meta-event types. The formatting of the line is

timestamp JobName eventName condorID jobTag - sequenceNumber


The JobName is the name given to the node job as defined in the DAG input file with the command JOB. It identifies the node within the DAG.

The eventName is one of the many defined event or meta-events given in the lists below.

The condorID field is the job’s ClusterId attribute, a period, and the ProcId attribute. There is no condorID assigned yet for some meta-events, such as PRE_SCRIPT_STARTED. For these, the dash character (‘-‘) is printed.

The jobTag field is defined for the Pegasus workflow manager. Its usage is generalized to be useful to other workflow managers. Pegasus-managed jobs add a line of the following form to their HTCondor submit description file:

+pegasus_site = "local"


This defines the string local as the jobTag field.

Generalized usage adds a set of 2 commands to the HTCondor submit description file to define a string as the jobTag field:

+job_tag_name = "+job_tag_value"
+job_tag_value = "viz"


This defines the string viz as the jobTag field. Without any of these added lines within the HTCondor submit description file, the dash character (‘-‘) is printed for the jobTag field.

The sequenceNumber is a monotonically-increasing number that starts at one. It is associated with each attempt at running a node. If a node is retried, it gets a new sequence number; a submit failure does not result in a new sequence number. When a Rescue DAG is run, the sequence numbers pick up from where they left off within the previous attempt at running the DAG. Note that this only applies if the Rescue DAG is run automatically or with the -dorescuefrom command-line option.

Here is an example of a very simple Pegasus jobstate.log file, assuming the example jobTag field of local:

1292620511 INTERNAL *** DAGMAN_STARTED 4972.0 ***
1292620523 NodeA PRE_SCRIPT_STARTED - local - 1
1292620523 NodeA PRE_SCRIPT_SUCCESS - local - 1
1292620525 NodeA SUBMIT 4973.0 local - 1
1292620525 NodeA EXECUTE 4973.0 local - 1
1292620526 NodeA JOB_TERMINATED 4973.0 local - 1
1292620526 NodeA JOB_SUCCESS 0 local - 1
1292620526 NodeA POST_SCRIPT_STARTED 4973.0 local - 1
1292620531 NodeA POST_SCRIPT_TERMINATED 4973.0 local - 1
1292620531 NodeA POST_SCRIPT_SUCCESS 4973.0 local - 1
1292620535 INTERNAL *** DAGMAN_FINISHED 0 ***


## Status Information for the DAG in a ClassAd¶

The condor_dagman job places information about the status of the DAG into its own job ClassAd. The attributes are fully described in Job ClassAd Attributes. The attributes are

• DAG_NodesTotal

• DAG_NodesDone

• DAG_NodesPrerun

• DAG_NodesQueued

• DAG_NodesPostrun

• DAG_NodesReady

• DAG_NodesFailed

• DAG_NodesUnready

• DAG_Status

• DAG_InRecovery

Note that most of this information is also available in the dagman.out file as described in DAG Monitoring.

## Managing Large Numbers of Jobs with DAGMan¶

Using DAGMan is recommended when submitting large numbers of jobs. The recommendation holds whether the jobs are represented by a DAG due to dependencies, or all the jobs are independent of each other, such as they might be in a parameter sweep. DAGMan offers:

• Throttling

Throttling limits the number of submitted jobs at any point in time.

• Retry of jobs that fail

This is a useful tool when an intermittent error may cause a job to fail or may cause a job to fail to run to completion when attempted at one point in time, but not at another point in time. The conditions under which retry occurs are user-defined. In addition, the administrative support that facilitates the rerunning of only those jobs that fail is automatically generated.

• Scripts associated with node jobs

PRE and POST scripts run on the submit host before and/or after the execution of specified node jobs.

Each of these capabilities is described in detail within this manual section about DAGMan. To make effective use of DAGMan, there is no way around reading the appropriate subsections.

To run DAGMan with large numbers of independent jobs, there are generally two ways of organizing and specifying the files that control the jobs. Both ways presume that programs or scripts will generate needed files, because the file contents are either large and repetitive, or because there are a large number of similar files to be generated representing the large numbers of jobs. The two file types needed are the DAG input file and the submit description file(s) for the HTCondor jobs represented. Each of the two ways is presented separately:

A unique submit description file for each of the many jobs. A single DAG input file lists each of the jobs and specifies a distinct submit description file for each job. The DAG input file is simple to generate, as it chooses an identifier for each job and names the submit description file. For example, the simplest DAG input file for a set of 1000 independent jobs, as might be part of a parameter sweep, appears as

# file sweep.dag
JOB job0 job0.submit
JOB job1 job1.submit
JOB job2 job2.submit
...
JOB job999 job999.submit


There are 1000 submit description files, with a unique one for each of the job<N> jobs. Assuming that all files associated with this set of jobs are in the same directory, and that files continue the same naming and numbering scheme, the submit description file for job6.submit might appear as

# file job6.submit
universe = vanilla
executable = /path/to/executable
log = job6.log
input = job6.in
output = job6.out
arguments = "-file job6.out"
queue


Submission of the entire set of jobs uses the command line:

$condor_submit_dag sweep.dag  A benefit to having unique submit description files for each of the jobs is that they are available if one of the jobs needs to be submitted individually. A drawback to having unique submit description files for each of the jobs is that there are lots of submit description files. Single submit description file. A single HTCondor submit description file might be used for all the many jobs of the parameter sweep. To distinguish the jobs and their associated distinct input and output files, the DAG input file assigns a unique identifier with the VARS command. # file sweep.dag JOB job0 common.submit VARS job0 runnumber="0" JOB job1 common.submit VARS job1 runnumber="1" JOB job2 common.submit VARS job2 runnumber="2" ... JOB job999 common.submit VARS job999 runnumber="999"  The single submit description file for all these jobs utilizes the runnumber variable value in its identification of the job’s files. This submit description file might appear as # file common.submit universe = vanilla executable = /path/to/executable log = wholeDAG.log input = job$(runnumber).in
output = job$(runnumber).out arguments = "-$(runnumber)"
queue


The job with runnumber="8" expects to find its input file job8.in in the single, common directory, and it sends its output to job8.out. The single log for all job events of the entire DAG is wholeDAG.log. Using one file for the entire DAG meets the limitation that no macro substitution may be specified for the job log file, and it is likely more efficient as well. This node’s executable is invoked with

/path/to/executable -8


These examples work well with respect to file naming and file location when there are less than several thousand jobs submitted as part of a DAG. The large numbers of files per directory becomes an issue when there are greater than several thousand jobs submitted as part of a DAG. In this case, consider a more hierarchical structure for the files instead of a single directory. Introduce a separate directory for each run. For example, if there were 10,000 jobs, there would be 10,000 directories, one for each of these jobs. The directories are presumed to be generated and populated by programs or scripts that, like the previous examples, utilize a run number. Each of these directories named utilizing the run number will be used for the input, output, and log files for one of the many jobs.

As an example, for this set of 10,000 jobs and directories, assume that there is a run number of 600. The directory will be named dir600, and it will hold the 3 files called in, out, and log, representing the input, output, and HTCondor job log files associated with run number 600.

The DAG input file sets a variable representing the run number, as in the previous example:

# file biggersweep.dag
JOB job0 bigger.submit
VARS job0 runnumber="0"
JOB job1 bigger.submit
VARS job1 runnumber="1"
JOB job2 bigger.submit
VARS job2 runnumber="2"
.
.
.
JOB job9999 bigger.submit
VARS job9999 runnumber="9999"


A single HTCondor submit description file may be written. It resides in the same directory as the DAG input file.

# file bigger.submit
universe = vanilla
executable = /path/to/executable
log = log
input = in
output = out
arguments = "-$(runnumber)" initialdir = dir$(runnumber)
queue


One item to care about with this set up is the underlying file system for the pool. The transfer of files (or not) when using initialdir differs based upon the job universe and whether or not there is a shared file system. See the condor_submit manual page for the details on the submit command.

Submission of this set of jobs is no different than the previous examples. With the current working directory the same as the one containing the submit description file, the DAG input file, and the subdirectories:

$condor_submit_dag biggersweep.dag  ## Workflow Metrics¶ For every DAG, a metrics file is created. This metrics file is named <dag_file_name>.metrics, where <dag_file_name> is the name of the DAG input file. In a workflow with nested DAGs, each nested DAG will create its own metrics file. Here is an example metrics output file: { "client":"condor_dagman", "version":"8.1.0", "planner":"/lfs1/devel/Pegasus/pegasus/bin/pegasus-plan", "planner_version":"4.3.0cvs", "type":"metrics", "wf_uuid":"htcondor-test-job_dagman_metrics-A-subdag", "root_wf_uuid":"htcondor-test-job_dagman_metrics-A", "start_time":1375313459.603, "end_time":1375313491.498, "duration":31.895, "exitcode":1, "dagman_id":"26", "parent_dagman_id":"11", "rescue_dag_number":0, "jobs":4, "jobs_failed":1, "jobs_succeeded":3, "dag_jobs":0, "dag_jobs_failed":0, "dag_jobs_succeeded":0, "total_jobs":4, "total_jobs_run":4, "total_job_time":0.000, "dag_status":2 }  Here is an explanation of each of the items in the file: • client: the name of the client workflow software; in the example, it is "condor_dagman" • version: the version of the client workflow software • planner: the workflow planner, as read from the braindump.txt file • planner_version: the planner software version, as read from the braindump.txt file • type: the type of data, "metrics" • wf_uuid: the workflow ID, generated by pegasus-plan, as read from the braindump.txt file • root_wf_uuid: the root workflow ID, which is relevant for nested workflows. It is generated by pegasus-plan, as read from the braindump.txt file. • start_time: the start time of the client, in epoch seconds, with millisecond precision • end_time: the end time of the client, in epoch seconds, with millisecond precision • duration: the duration of the client, in seconds, with millisecond precision • exitcode: the condor_dagman exit code • dagman_id: the value of the ClusterId attribute of the condor_dagman instance • parent_dagman_id: the value of the ClusterId attribute of the parent condor_dagman instance of this DAG; empty if this DAG is not a SUBDAG • rescue_dag_number: the number of the Rescue DAG being run, or 0 if not running a Rescue DAG • jobs: the number of nodes in the DAG input file, not including SUBDAG nodes • jobs_failed: the number of failed nodes in the workflow, not including SUBDAG nodes • jobs_succeeded: the number of successful nodes in the workflow, not including SUBDAG nodes; this includes jobs that succeeded after retries • dag_jobs: the number of SUBDAG nodes in the DAG input file • dag_jobs_failed: the number of SUBDAG nodes that failed • dag_jobs_succeeded: the number of SUBDAG nodes that succeeded • total_jobs: the total number of jobs in the DAG input file • total_jobs_run: the total number of nodes executed in a DAG. It should be equal to jobs_succeeded + jobs_failed + dag_jobs_succeeded + dag_jobs_failed • total_job_time: the sum of the time between the first execute event and the terminated event for all jobs that are not SUBDAGs • dag_status: the final status of the DAG, with values • 0: OK • 1: error; an error condition different than those listed here • 2: one or more nodes in the DAG have failed • 3: the DAG has been aborted by an ABORT-DAG-ON specification • 4: removed; the DAG has been removed by condor_rm • 5: a cycle was found in the DAG • 6: the DAG has been halted; see the Suspending a Running DAG section for an explanation of halting a DAG Note that any dag_status other than 0 corresponds to a non-zero exit code. The braindump.txt file is generated by pegasus-plan; the name of the braindump.txt file is specified with the PEGASUS_BRAINDUMP_FILE environment variable. If not specified, the file name defaults to braindump.txt, and it is placed in the current directory. Note that the total_job_time value is always zero, because the calculation of that value has not yet been implemented. ## DAGMan and Accounting Groups¶ As of version 8.5.6, condor_dagman propagates accounting_group and accounting_group_user values specified for condor_dagman itself to all jobs within the DAG (including sub-DAGs). The accounting_group and accounting_group_user values can be specified using the -append flag to condor_submit_dag, for example: $ condor_submit_dag -append accounting_group=group_physics -append \
accounting_group_user=albert relativity.dag


See Group Accounting for a discussion of group accounting and Accounting Groups with Hierarchical Group Quotas for a discussion of accounting groups with hierarchical group quotas.