Submitting Jobs Without a Shared File System: HTCondor’s File Transfer Mechanism¶
HTCondor works well without a shared file system between the submit machines and the worker nodes. The HTCondor file transfer mechanism allows the user to explicitly select which input files are transferred to the worker node before the job starts. HTCondor will transfer these files, potentially delaying this transfer request, if starting the transfer right away would overload the submit machine. Queueing requests like this prevents the crashes so common with too-busy shared file servers. These input files are placed into a scratch directory on the worker node, which is the starting current directory of the job. When the job completes, by default, HTCondor detects any newly-created files at the top level of this sandbox directory, and transfers them back to the submitting machine. The input sandbox is what we call the executable and all the declared input files of a job. The set of all files created by the job is the output sandbox.
Specifying If and When to Transfer Files¶
To enable the file transfer mechanism, place this command in the job’s submit description file: should_transfer_files
should_transfer_files = YES
Setting the should_transfer_files command explicitly enables or disables the file transfer mechanism. The command takes on one of three possible values:
YES: HTCondor transfers the input sandbox from the submit machine to the execute machine. The output sandbox is transferred back to the submit machine. The command when_to_transfer_output . controls when the output sandbox is transferred back, and what directory it is stored in.
IF_NEEDED: HTCondor only transfers sandboxes when the job is matched with a machine in a different
FileSystemDomainthan the one the submit machine belongs to, as if should_transfer_files = YES. If the job is matched with a machine in the same
FileSystemDomainas the submitting machine, HTCondor will not transfer files and relies on the shared file system.
NO: HTCondor’s file transfer mechanism is disabled. In this case is is the responsibility of the user to ensure that all data used by the job is accessible on the remote worker node.
The when_to_transfer_output command tells HTCondor when output files are to be transferred back to the submit machine. The command takes on one of three possible values:
ON_EXIT(the default): HTCondor transfers the output sandbox back to the submit machine only when the job exits on its own. If the job is preempted or removed, no files are transfered back.
ON_EXIT_OR_EVICT: HTCondor behaves the same as described for the value ON_EXIT when the job exits on its own. However, each time the job is evicted from a machine, the output sandbox is transferred back to the submit machine and placed under the SPOOL directory. eviction time. Before the job starts running again, the former output sandbox is copied to the job’s new remote scratch directory.
If transfer_output_files is specified, this list governs which files are transferred back at eviction time. If a file listed in transfer_output_files does not exist at eviction time, the job will go on hold.
The purpose of saving files at eviction time is to allow the job to resume from where it left off.
ON_SUCCESS: HTCondor transfers files like
ON_EXIT, but only if the job succeeds, as defined by the
success_exit_codesubmit command. The
successs_exit_codecommand must be used, even for the default exit code of 0. (See the condor_submit man page.)
The default values for these two submit commands make sense as used
together. If only should_transfer_files is set, and set to the
NO, then no output files will be transferred, and the value of
when_to_transfer_output is irrelevant. If only
when_to_transfer_output is set, and set to the value
ON_EXIT_OR_EVICT, then the default value for an unspecified
should_transfer_files will be
Note that the combination of
should_transfer_files = IF_NEEDED when_to_transfer_output = ON_EXIT_OR_EVICT
would produce undefined file access semantics. Therefore, this combination is prohibited by condor_submit.
Specifying What Files to Transfer¶
If the file transfer mechanism is enabled, HTCondor will transfer the following files before the job is run on a remote machine as the input sandbox:
the executable, as defined with the executable command
the input, as defined with the input command
any jar files, for the java universe, as defined with the jar_files command
If the job requires other input files, the submit description file should have the transfer_input_files command. This comma-separated list specifies any other files, URLs, or directories that HTCondor is to transfer to the remote scratch directory, to set up the execution environment for the job before it is run. These files are placed in the same directory as the job’s executable. For example:
executable = my_program input = my_input should_transfer_files = YES transfer_input_files = file1,file2
This example explicitly enables the file transfer mechanism. By default,
HTCondor will transfer the executable (
my_program) and the file
specified by the input command (
my_input). The files
file2 are also transferred, by explicit user instruction.
If the file transfer mechanism is enabled, HTCondor will transfer the following files from the execute machine back to the submit machine after the job exits, as the output sandbox.
the output file, as defined with the output command
the error file, as defined with the error command
any files created by the job in the remote scratch directory.
A path given for output and error commands represents a path on the submit machine. If no path is specified, the directory specified with initialdir is used, and if that is not specified, the directory from which the job was submitted is used. At the time the job is submitted, zero-length files are created on the submit machine, at the given path for the files defined by the output and error commands. This permits job submission failure, if these files cannot be written by HTCondor.
To restrict the output files or permit entire directory contents to be
transferred, specify the exact list with
When this comma separated list is defined, and any of the files or directories do not
exist as the job exits, HTCondor considers this an error, and places the
job on hold. Setting
to the empty string (“”) means no files are to be transferred. When this
list is defined, automatic detection of output files created by the job
is disabled. Paths specified in this list refer to locations on the
execute machine. The naming and placement of files and directories
relies on the term base name. By example, the path
a/b/c has the
c. It is the file name or directory name with all
directories leading up to that name stripped off. On the submit machine,
the transferred files or directories are named using only the base name.
Therefore, each output file or directory must have a different name,
even if they originate from different paths.
If only a subset of the output sandbox should be transferred, the subset is specified by further adding a submit command of the form:
transfer_output_files = file1, file2
Here are examples of file transfer with HTCondor. Assume that the job produces the following structure within the remote scratch directory:
o1 o2 d1 (directory) o3 o4
If the submit description file sets
transfer_output_files = o1,o2,d1
then transferred back to the submit machine will be
o1 o2 d1 (directory) o3 o4
Note that the directory
d1 and all its contents are specified, and
therefore transferred. If the directory
d1 is not created by the job
before exit, then the job is placed on hold. If the directory
created by the job before exit, but is empty, this is not an error.
If, instead, the submit description file sets
transfer_output_files = o1,o2,d1/o3
then transferred back to the submit machine will be
o1 o2 o3
Note that only the base name is used in the naming and placement of the
file specified with
File Paths for File Transfer¶
The file transfer mechanism specifies file names or URLs on the file system of the submit machine and file names on the execute machine. Care must be taken to know which machine, submit or execute, is referencing the file.
Files in the transfer_input_files command are specified as they are accessed on the submit machine. The job, as it executes, accesses files as they are found on the execute machine.
There are four ways to specify files and paths for transfer_input_files :
Relative to the current working directory as the job is submitted, if the submit command initialdir is not specified.
Relative to the initial directory, if the submit command initialdir is specified.
Absolute file paths.
As an URL, which should be accessible by the execute machine.
Before executing the program, HTCondor copies the input sandbox into a remote scratch directory on the execute machine, where the program runs. Therefore, the executing program must access input files relative to its working directory. Because all files and directories listed for transfer are placed into a single, flat directory, inputs must be uniquely named to avoid collision when transferred.
A job may instead set
True), in which
case the relative paths of transferred files are preserved. For example,
although the input list
dirA/file1, dirB/file1 would normally result in
a collision, instead HTCondor will create the directories
dirB in the input sandbox, and each will get its corresponding version
Both relative and absolute paths may be used in transfer_output_files . Relative paths are relative to the job’s remote scratch directory on the execute machine. When the files and directories are copied back to the submit machine, they are placed in the job’s initial working directory as the base name of the original path. An alternate name or path may be specified by using transfer_output_remaps .
preserve_relative_paths command also applies to relative paths
specified in transfer_output_files (if not remapped).
A job may create files outside the remote scratch directory but within
the file system of the execute machine, in a directory such as
if this directory is guaranteed to exist and be accessible on all
possible execute machines. However, HTCondor will not automatically
transfer such files back after execution completes, nor will it clean up
Here are several examples to illustrate the use of file transfer. The
program executable is called my_program, and it uses three
command-line arguments as it executes: two input file names and an
output file name. The program executable and the submit description file
for this job are located in directory
Here is the directory tree as it exists on the submit machine, for all the examples:
/scratch/test (directory) my_program.condor (the submit description file) my_program (the executable) files (directory) logs2 (directory) in1 (file) in2 (file) logs (directory)
This first example explicitly transfers input files. These input
files to be transferred are specified relative to the directory
where the job is submitted. An output file specified in the
out1, is created when the job is executed. It will be
transferred back into the directory
# file name: my_program.condor # HTCondor submit description file for my_program executable = my_program universe = vanilla error = logs/err.$(cluster) output = logs/out.$(cluster) log = logs/log.$(cluster) should_transfer_files = YES transfer_input_files = files/in1,files/in2 arguments = in1 in2 out1 queue
The log file is written on the submit machine, and is not involved with the file transfer mechanism.
This second example is identical to Example 1, except that absolute paths to the input files are specified, instead of relative paths to the input files.
# file name: my_program.condor # HTCondor submit description file for my_program executable = my_program universe = vanilla error = logs/err.$(cluster) output = logs/out.$(cluster) log = logs/log.$(cluster) should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = /scratch/test/files/in1,/scratch/test/files/in2 arguments = in1 in2 out1 queue
This third example illustrates the use of the submit command
initialdir , and its
effect on the paths used for the various files. The expected
location of the executable is not affected by the
All other files (specified by
as well as files modified or created by the job and automatically
transferred back) are located relative to the specified
Therefore, the output file,
out1, will be placed in the files
directory. Note that the
logs2 directory exists to make this
example work correctly.
# file name: my_program.condor # HTCondor submit description file for my_program executable = my_program universe = vanilla error = logs2/err.$(cluster) output = logs2/out.$(cluster) log = logs2/log.$(cluster) initialdir = files should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = in1,in2 arguments = in1 in2 out1 queue
Example 4 - Illustrates an Error
This example illustrates a job that will fail. The files specified using the transfer_input_files command work correctly (see Example 1). However, relative paths to files in the arguments command cause the executing program to fail. The file system on the submission side may utilize relative paths to files, however those files are placed into the single, flat, remote scratch directory on the execute machine.
# file name: my_program.condor # HTCondor submit description file for my_program executable = my_program universe = vanilla error = logs/err.$(cluster) output = logs/out.$(cluster) log = logs/log.$(cluster) should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = files/in1,files/in2 arguments = files/in1 files/in2 files/out1 queue
This example fails with the following error:
err: files/out1: No such file or directory.
Example 5 - Illustrates an Error
As with Example 4, this example illustrates a job that will fail. The executing program’s use of absolute paths cannot work.
# file name: my_program.condor # HTCondor submit description file for my_program executable = my_program universe = vanilla error = logs/err.$(cluster) output = logs/out.$(cluster) log = logs/log.$(cluster) should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = /scratch/test/files/in1, /scratch/test/files/in2 arguments = /scratch/test/files/in1 /scratch/test/files/in2 /scratch/test/files/out1 queue
The job fails with the following error:
err: /scratch/test/files/out1: No such file or directory.
This example illustrates a case where the executing program creates an output file in a directory other than within the remote scratch directory that the program executes within. The file creation may or may not cause an error, depending on the existence and permissions of the directories on the remote file system.
The output file
/tmp/out1 is transferred back to the job’s
initial working directory as
# file name: my_program.condor # HTCondor submit description file for my_program executable = my_program universe = vanilla error = logs/err.$(cluster) output = logs/out.$(cluster) log = logs/log.$(cluster) should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = files/in1,files/in2 transfer_output_files = /tmp/out1 arguments = in1 in2 /tmp/out1 queue
A dataflow job is a job that might not need to run because its desired outputs already exist. To skip such a job, add the following line to your submit file:
skip_if_dataflow = True
A dataflow job meets any of the following criteria:
Output files exist, are newer than input files
Execute file is newer than input files
Standard input file is newer than input files
Skipping dataflow jobs can potentially save large amounts of time in long-running workflows.
Public Input Files¶
There are some cases where HTCondor’s file transfer mechanism is inefficient. For jobs that need to run a large number of times, the input files need to get transferred for every job, even if those files are identical. This wastes resources on both the submit machine and the network, slowing overall job execution time.
Public input files allow a user to specify files to be transferred over a publicly-available HTTP web service. A system administrator can then configure caching proxies, load balancers, and other tools to dramatically improve performance. Public input files are not available by default, and need to be explicitly enabled by a system administrator.
To specify files that use this feature, the submit file should include a public_input_files command. This comma-separated list specifies files which HTCondor will transfer using the HTTP mechanism. For example:
should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = file1,file2 public_input_files = public_data1,public_data2
Similar to the regular transfer_input_files , the files specified in public_input_files can be relative to the submit directory, or absolute paths. You can also specify an initialDir , and condor_submit will look for files relative to that directory. The files must be world-readable on the file system (files with permissions set to 0644, directories with permissions set to 0755).
Lastly, all files transferred using this method will be publicly available and world-readable, so this feature should not be used for any sensitive data.
Behavior for Error Cases¶
This section describes HTCondor’s behavior for some error cases in dealing with the transfer of files.
- Disk Full on Execute Machine
When transferring any files from the submit machine to the remote scratch directory, if the disk is full on the execute machine, then the job is place on hold.
- Error Creating Zero-Length Files on Submit Machine
As a job is submitted, HTCondor creates zero-length files as placeholders on the submit machine for the files defined by output and error . If these files cannot be created, then job submission fails.
This job submission failure avoids having the job run to completion, only to be unable to transfer the job’s output due to permission errors.
- Error When Transferring Files from Execute Machine to Submit Machine
When a job exits, or potentially when a job is evicted from an execute machine, one or more files may be transferred from the execute machine back to the machine on which the job was submitted.
During transfer, if any of the following three similar types of errors occur, the job is put on hold as the error occurs.
If the file cannot be opened on the submit machine, for example because the system is out of inodes.
If the file cannot be written on the submit machine, for example because the permissions do not permit it.
If the write of the file on the submit machine fails, for example because the system is out of disk space.
File Transfer Using a URL¶
Instead of file transfer that goes only between the submit machine and the execute machine, HTCondor has the ability to transfer files from a location specified by a URL for a job’s input file, or from the execute machine to a location specified by a URL for a job’s output file(s). This capability requires administrative set up, as described in the Setting Up for Special Environments section.
The transfer of an input file is restricted to vanilla and vm universe jobs only. HTCondor’s file transfer mechanism must be enabled. Therefore, the submit description file for the job will define both should_transfer_files and when_to_transfer_output . In addition, the URL for any files specified with a URL are given in the transfer_input_files command. An example portion of the submit description file for a job that has a single file specified with a URL:
should_transfer_files = YES when_to_transfer_output = ON_EXIT transfer_input_files = http://www.full.url/path/to/filename
The destination file is given by the file name within the URL.
For the transfer of the entire contents of the output sandbox, which are all files that the job creates or modifies, HTCondor’s file transfer mechanism must be enabled. In this sample portion of the submit description file, the first two commands explicitly enable file transfer, and the added output_destination command provides both the protocol to be used and the destination of the transfer.
should_transfer_files = YES when_to_transfer_output = ON_EXIT output_destination = urltype://path/to/destination/directory
Note that with this feature, no files are transferred back to the submit machine. This does not interfere with the streaming of output.
Uploading to URLs using output file remaps
File transfer plugins now support uploads as well as downloads. The
transfer_output_remaps attribute can additionally be used to upload
files to specific URLs when a job completes. To do this, set the
destination for an output file to a URL instead of a filename. For
transfer_output_remaps = "myresults.dat = http://destination-server.com/myresults.dat"
We use a HTTP PUT request to perform the upload, so the user is responsible for making sure that the destination server accepts PUT requests (which is usually disabled by default).
Passing a credential for URL file transfers
Some files served over HTTPS will require a credential in order to
download. Each credential
cred should be placed in a file in
$_CONDOR_CREDS/cred.use. Then in order to use that credential for a
download, append its name to the beginning of the URL protocol along
with a + symbol. For example, to download the file
https://download.com/bar using the
cred credential, specify the
following in the submit file:
transfer_input_files = cred+https://download.com/bar
If your credential file has an underscore in it,
the underscore must be replaced in the
with a “.”, e.g. for
transfer_input_files = cred.local+https://download.com/bar
Otherwise, the credential file must have a name that only contains
alphanumeric characters (a-z, A-Z, 0-9) and/or
except for the
. in the
If you’re using a token from an OAuth service provider,
the credential will be named based on the OAuth provider.
For example, if your submit file has
use_oauth_services = mytokens,
you can request files using that token by doing:
use_oauth_services = mytokens transfer_input_files = mytokens+https://download.com/bar
If you add an optional handle to the token name, append the handle name to the token name in the URL with a “.”:
use_oauth_services = mytokens mytokens_oauth_permissions_personal = mytokens_oauth_permissions_group = transfer_input_files = mytokens.personal+https://download.com/bar, mytokens.group+https://download.com/foo
Note that in the above token-with-a-handle case,
the token files will be stored in the job
Transferring files using file transfer plugins
HTCondor comes with file transfer plugins that can communicate with Box.com, Google Drive, and Microsoft OneDrive. Using one of these plugins requires that the HTCondor pool administrator has set up the mechanism for HTCondor to gather credentials for the desired service, and requires that your submit file contains the proper commands to obtain credentials from the desired service (see Jobs That Require Credentials).
To use a file transfer plugin,
https in a transfer URL with the service name
box for Box.com,
gdrive for Google Drive, and
onedrive for Microsoft OneDrive)
and reference a file path starting at the root directory of the service.
For example, to download
bar.txt from a Box.com account
bar.txt is in the
foo folder, use:
use_oauth_services = box transfer_input_files = box://foo/bar.txt
If your job requests multiple credentials from the same service,
to reference each specific credential.
For example, for a job that uses Google Drive to
public_files/input.txt from one account (
and to upload
my_private_files/output.txt on a second account (
use_oauth_services = gdrive gdrive_oauth_permissions_public = gdrive_oauth_permissions_private = transfer_input_files = public+gdrive://public_files/input.txt transfer_output_remaps = "output.txt = private+gdrive://my_private_files/output.txt"
Transferring files to and from S3
HTCondor supports downloading files from and uploading files to Amazon’s Simple
Storage Service (S3) using
s3:// URLs. Downloading or uploading requires
a two-part credential: the “access key ID” and the “secret key ID”. HTCondor
does not transfer these credentials off the submit node; instead, it uses
them to construct “pre-signed”
https:// URLs that temporarily allow
the bearer access. (Thus, an execute node needs to support
URLs for S3 URLs to work.)
To make use of this feature, specify a file containing your access key ID (and nothing else), a file containing your secret access key (and nothing else), and one or more S3 URLs in one of three forms:
aws_access_key_id_file = /home/example/secrets/accessKeyID aws_secret_access_key_file = /home/example/secrets/secretAccessKey # For old, non-region-specific buckets. transfer_input_files = s3://<bucket-name>/<key-name>, # or, for new, region-specific buckets: transfer_input_files = s3://<bucket-name>.s3.<region>.amazonaws.com/<key> # or, for non-AWS services with an S3 API; <host> must contain a dot: transfer_input_files = s3://<host>/<key> # Optionally, specify a region for S3 URLs which don't include one: aws_region = <region>
aws_region command may also be used to specify a region for S3 URLs
which don’t include one (even for non-AWS services).
HTCondor does not currently support transferring entire buckets or directories
from S3. However, if you specify an
s3:// URL as the
output_destination, that URL will be used a prefix for each output file’s
location; if you specify a URL ending a
/, it will be treated like a
You may also use S3 URLs in