condor_qsub
Queue jobs that use PBS/SGE-style submission
Synopsis
condor_qsub [–version]
condor_qsub [Specific options ] [Directory options ] [Environmental options ] [File options ] [Notification options ] [Resource options ] [Status options ] [Submission options ] commandfile
Description
condor_qsub submits an HTCondor job. This job is specified in a PBS/Torque style or an SGE style. condor_qsub permits the submission of dependent jobs without the need to specify the full dependency graph at submission time. Doing things this way is neither as efficient as HTCondor’s DAGMan, nor as functional as SGE’s qsub or qalter. condor_qsub serves as a minimal translator to be able to use software originally written to interact with PBS, Torque, and SGE in an HTCondor pool.
condor_qsub attempts to behave like qsub. Less than half of the qsub functionality is implemented. Option descriptions describe the differences between the behavior of qsub and condor_qsub. qsub options not listed here are not supported. Some concepts present in PBS and SGE do not apply to HTCondor, and so these options are not implemented.
For a full listing of qsub options, please see
condor_qsub accepts either command line options or the single file, commandfile, that contains all of the commands.
condor_qsub does the opposite of job submission within the grid universe batch grid type, which takes HTCondor jobs submitted with HTCondor syntax and submits them to PBS, SGE, or LSF.
Options
- -a date_time
(Submission option) Specify a deferred execution date and time. The PBS/Torque syntax of date_time is a string in the form [[[[CC]YY]MM]DD]hhmm[.SS]. The portions of this string which are optional are CC, YY, MM, DD, and SS. For SGE, MM and DD are not optional. For PBS, MM and DD are optional. condor_qsub follows the PBS style.
- -A account_string
(Status option) Uses group accounting where the string account_string is the accounting group associated with this job. Unlike SGE, there is no default group of
"sge"
.- -b y|n
(Submission option) Using the SGE definition of its -b option, a value of y causes condor_qsub to not parse the file for additional condor_qsub commands. The default value is n. If the command line argument -f filename is also specified, it negates a value of y.
- -condor-keep-files
(Specific option) Directs HTCondor to not remove temporary files generated by condor_qsub, such as HTCondor submit files and sentinel jobs. These temporary files may be important for debugging.
- -cwd
(Directory option) Specifies the initial directory in which the job will run to be the current directory from which the job was submitted. This sets initialdir for condor_submit.
- -d path or -wd path
(Directory option) Specifies the initial directory in which the job will run to be path. This sets initialdir for condor_submit.
- -e filename
(File option) Specifies the condor_submit command error, the file where
stderr
is written. If not specified, set to the default name of `` <commandfile>.e<ClusterId>``, where<commandfile>
is the condor_qsub argument, and `` <ClusterId>`` is the job attribute ClusterId assigned for the job.- -f qsub_file
(Specific option) Parse qsub_file to search for and set additional condor_submit commands. Within the file, commands will appear as
#PBS
or#SGE
. condor_qsub will parse the batch file listed as qsub_file.- -h
(Status option) Placed submitted job directly into the hold state.
- -help
(Specific option) Print usage information and exit.
- -hold_jid <jid>
(Status option) Submits a job in the hold state. This job is released only when a previously submitted job, identified by its cluster ID as <jid>, exits successfully. Successful completion is defined as not exiting with exit code 100. In implementation, there are three jobs that define this SGE feature. The first job is the previously submitted job. The second job is the newly submitted one that is waiting for the first to finish successfully. The third job is what SGE calls a sentinel job; this is an HTCondor local universe job that watches the history for the first job’s exit code. This third job will exit once it has seen the exit code and, for a successful termination of the first job, run condor_release on the second job. If the first job is an array job, the second job will only be released after all individual jobs of the first job have completed.
- -i [hostname:]filename
(File option) Specifies the condor_submit command input, the file from which
stdin
is read.- -j characters
(File option) Acceptable characters for this option are
e
,o
, andn
. The only sequence that is relevant iseo
; it specifies that both standard output and standard error are to be sent to the same file. The file will be the one specified by the -o option, if both the -o and -e options exist. The file will be the one specified by the -e option, if only the -e option is provided. If neither the -o nor the -e options are provided, the file will be the default used for the -o option.- -l resource_spec
(Resource option) Specifies requirements for the job, such as the amount of RAM and the number of CPUs. Only PBS-style resource requests are supported. resource_spec is a comma separated list of key/value pairs. Each pair is of the form
resource_name=value
.resource_name
andvalue
may be +————————–+————————–+————————–+ |resource_name
|value
| Description | +————————–+————————–+————————–+ | arch | string | Sets Arch machine | | | | attribute. Enclose in | | | | double quotes. | +————————–+————————–+————————–+ | file | size | Disk space requested. | +————————–+————————–+————————–+ | host | string | Host machine on which | | | | the job must run. | +————————–+————————–+————————–+ | mem | size | Amount of memory | | | | requested. | +————————–+————————–+————————–+ | nodes |{<node_count> | <hostn | Number and/or properties | | | ame>} [:ppn=<ppn>] [:gpu | of nodes to be used. For | | | s=<gpu>] [:<property> [: | examples, please see | | | <property>] ...] [+ ...]
| http://docs.adaptivecom | | | | puting.com/torque/4-1-3/ | | | | Content/topics/2-jobs/re | | | | questingRes.htm#qsub | +————————–+————————–+————————–+ | opsys | string | Sets OpSys machine | | | | attribute. Enclose in | | | | double quotes. | +————————–+————————–+————————–+ | procs | integer | Number of CPUs | | | | requested. | +————————–+————————–+————————–+A size value is an integer specified in bytes, following the PBS/Torque default. Append
Kb
,Mb
,Gb
, orTb
to specify the value in powers of two quantities greater than bytes.- -m a|e|n
(Notification option) Identify when HTCondor sends notification e-mail. If a, send e-mail when the job terminates abnormally. If e, send e-mail when the job terminates. If n, never send e-mail.
- -M e-mail_address
(Notification option) Sets the destination address for HTCondor e-mail.
- -o filename
(File option) Specifies the condor_submit command output, the file where
stdout
is written. If not specified, set to the default name of `` <commandfile>.o<ClusterId>``, where<commandfile>
is the condor_qsub argument, and `` <ClusterId>`` is the job attribute ClusterId assigned for the job.- -p integer
(Status option) Sets the priority submit command for the job, with 0 being the default. Jobs with higher numerical priority will run before jobs with lower numerical priority.
(Specific option) Send to
stdout
the contents of the HTCondor submit description file that condor_qsub generates.- -r y|n
(Status option) The default value of y implements the default HTCondor policy of assuming that jobs that do not complete are placed back in the queue to be run again. When n, job submission is restricted to only running the job if the job ClassAd attribute NumJobStarts is currently 0. This identifies the job as not re-runnable, limiting it to start once.
- -S shell
(Submission option) Specifies the path and executable name of a shell. Alters the HTCondor submit description file produced, such that the executable becomes a wrapper script. Within the submit description file will be
executable = <shell>
andarguments = <commandfile>
.- -t start [-stop:step]
(Submission option) Queues a set of nearly identical jobs. The SGE-style syntax is supported. start, stop, and step are all integers. start is the starting index of the jobs, stop is the ending index (inclusive) of the jobs, and step is the step size through the indices. Note that using more than one processor or node in a job will not work with this option.
- -test
(Specific option) With the intention of testing a potential job submission, parse files and commands to generate error output. Produces, but then removes the HTCondor submit description file. Never submits the job, even if no errors are encountered.
- -v variable list
(Environmental option) Used to set the submit command environment for the job. variable list is as that defined for the submit command. Note that the syntax needed is specialized to deal with quote marks and white space characters.
- -V
(Environmental option) Sets
getenv = True
in the submit description file.- -W attr_name=attr_value[,attr_name=attr_value…]
(File option) PBS/Torque supports a number of attributes. However, condor_qsub only supports the names stagein and stageout for attr_name. The format of attr_value for stagein and stageout is
local_file@hostname:remote_file[,...]
and we strip it toremote_file[,...]
. HTCondor’s file transfer mechanism is then used if needed.- -version
(Specific option) Print version information for the condor_qsub program and exit. Note that condor_qsub has its own version numbers which are separate from those of HTCondor.
Exit Status
condor_qsub will exit with a status value of 0 (zero) upon success, and it will exit with the value 1 (one) upon failure to submit a job.